Scooterotica

rakki

Heidenau K38 is a good tyre, don't expect them to last long though.

rakki

Before shimming the gearbox you should install the rear drum and tighten it. By that you make sure the layshaft is in correct place. I'm not 100% sure but think that the kickstart spring can be used as gear selector spring. It's stiffer so the gearchange mechanism is a bit harder but it may help wit...

rakki

Basic rebuild of PX200 is so easy that you could do it in the dark while being drunk. Symptoms suggest that the cush drive springs might be broken, drilling the rivets out and assembling new ones can be pain in the arse.

rakki

Can't say a thing about that as I haven't done the conversion.

rakki

The part most likely the fail is CDI. I know several high mileage Rallyes with Femsa set-up that work brilliantly, but on the other hand have first hand experience with repro-femsas that lasted about 20 minutes. I suggest that you just bolt on what you have and see if it works as the whole system se...

rakki

The geometry of PX/Pk style fork is much better than in Sprint / Rally. Assuming that both forks are in good condition and have quality suspension parts the scooter with former will handle better.

rakki

With PX fork the front end will sit too high, PKXL2 is the way to go.

More info about conversions with plenty of pictures and different fork measurements can be found here (unfortunately in german, Google translate might work).

rakki

Upjet

rakki

Looks like Barum Classic : http://www.barum-scooter.com/classic.php?lang=en

rakki

Muppet wrote:Is that how a vespa bearing is lubed; petrol oil mix,

On Vespas the carb sits above the crankshaft and that helps to lubricate the flywheel side bearing (crank side bearing is lubricated with gearbox oil).

Search found 91 matches

Re: Block Tread Tyres

Re: TV175 Series 3 -62, restoration

Re: DIY PX200 engine rebuild

Re: Best conversion forks????

Re: Femsatronic rally 200 experience?

Re: Best conversion forks????

Re: Best conversion forks????

Re: New SIP Exhaust on a Standard P200

Re: is this new style classic conti tyre or an indian skidma

Re: Mag flange question

Login • Register

Advertising