Search found 146 matches

by immylam
Wed Mar 13, 2019 9:27 pm
Forum: Lambretta Tech
Topic: S3 engine in S1 frame - what kickstart?
Replies: 3
Views: 259

S3 engine in S1 frame - what kickstart?

I havea S1 kickstart but the bit for the bumpstop doesn't reach and S3 doesnt clear the rear runners. Is there 1 that will fit or just weld a bit onto bump catch?
by immylam
Fri Feb 22, 2019 7:40 pm
Forum: Lambretta Tech
Topic: Series 1 Wiring /elecrtonic ignition
Replies: 3
Views: 257

Series 1 Wiring /elecrtonic ignition

Iseries 1 loom with 2 joint green wires into 1 connector , 1 purple and 1 brown 1 separate green in thick sleeve (probably an earth?) (pink and black rear light) What goes where with regards to the regulator? All wires from stator sorted out ok to CDI. No ignition but has cut out button. Or best to ...
by immylam
Sun Feb 10, 2019 10:12 pm
Forum: Lambretta Tech
Topic: Monza Gearing 46 x 19
Replies: 4
Views: 371

Re: Monza Gearing 46 x 19

It's a pacemaker gearbox.
by immylam
Sun Feb 10, 2019 12:39 pm
Forum: Lambretta Tech
Topic: Monza Gearing 46 x 19
Replies: 4
Views: 371

Monza Gearing 46 x 19

Acquired a monza engine and putting it together currently, it was mostly built but I have noticed it has a 19 x 46 gearing. The builder of this was very knowledgeable about ratios etc but I wonder if this is best suitable. It wasn't run to test just started up previously and run with a 30 mil dellor...
by immylam
Tue Jan 22, 2019 8:17 pm
Forum: Lambretta Tech
Topic: Disc Brake Master Cylinder Options
Replies: 4
Views: 456

Re: Disc Brake Master Cylinder Options

Can the seals be replaced in the typhoon ones. I have one that the seal has failed in.
by immylam
Tue Jan 22, 2019 12:36 pm
Forum: Lambretta Tech
Topic: Disc Brake Master Cylinder Options
Replies: 4
Views: 456

Disc Brake Master Cylinder Options

Have a S1 that I have a disc brake for , what types of master cylinder can be fitted . I have a hidden semi hydraulic in another scooter but same type is quite hard to get and vastly overpriced (think it is off one of the older piaggio typhoons)Is there something similar that can be used?
by immylam
Sat Nov 03, 2018 1:55 pm
Forum: General Scooter Chat
Topic: Bridlington Custom Show Programme
Replies: 3
Views: 629

Re: Bridlington Custom Show Programme

Thanks very much to Toddy & especially Simon Collins for sorting this out for me.
by immylam
Wed Oct 31, 2018 12:18 am
Forum: General Scooter Chat
Topic: Bridlington Custom Show Programme
Replies: 3
Views: 629

Bridlington Custom Show Programme

Does anyone have a spare custom show programme from Bridlington that I could have? Our club didn't attend as we had a charity soul night on for our recently departed dear friend Steven Cunningham (starstream 2016) We sponsored a category in his memory at the Brid Custom Show (best club) and would li...
by immylam
Mon Sep 10, 2018 11:47 am
Forum: Lambretta Tech
Topic: BGM / RT 225CC KIT
Replies: 29
Views: 2787

Re: BGM / RT 225CC KIT

replaced a rapido road 225 with the RT225 in my Jet 200, scootopia exhaust and 30mm delly , better all round than the rapido a bit more top end and doesn't use as much petrol. Not the performance I get from my RB but then it is more a touring set up. Might change the exhaust at some point but fed up...