Search found 11 matches
- Fri Jun 05, 2020 8:37 pm
- Forum: Vespa Tech
- Topic: 12in wheel conversion
- Replies: 9
- Views: 4780
- Thu Jun 04, 2020 5:50 pm
- Forum: Vespa Tech
- Topic: 12in wheel conversion
- Replies: 9
- Views: 4780
Re: 12in wheel conversion
was looking at the sip rear wheel conversion which comes with gts rim just wondering if it would make 4th gear longer
etc
etc
- Sun May 31, 2020 10:16 pm
- Forum: Vespa Tech
- Topic: 12in wheel conversion
- Replies: 9
- Views: 4780
12in wheel conversion
Hi all
Has anyone done the 12in wheel conversion and what effect did it have on gearing
thanks in advance
Has anyone done the 12in wheel conversion and what effect did it have on gearing
thanks in advance
- Mon Feb 17, 2020 8:46 pm
- Forum: Vespa Tech
- Topic: polini 210 temp
- Replies: 2
- Views: 2130
polini 210 temp
hi all
fitted a temp sensor to my polini 210 just wondering if anybody knows what avg running temp should be and whats the max temp they can run at without a seizing up
cheers
fitted a temp sensor to my polini 210 just wondering if anybody knows what avg running temp should be and whats the max temp they can run at without a seizing up
cheers
- Sat Oct 13, 2018 8:32 pm
- Forum: Vespa Tech
- Topic: lower rear end
- Replies: 1
- Views: 1645
lower rear end
hi all
i have seen on the scooter service website they do an adapter to lower the front of a px by 15mm was wondering is there a way of lowering the rear
thanks in advance
i have seen on the scooter service website they do an adapter to lower the front of a px by 15mm was wondering is there a way of lowering the rear
thanks in advance
- Thu Aug 09, 2018 9:03 pm
- Forum: Vespa Tech
- Topic: carb jetting for polini 210
- Replies: 0
- Views: 1758
carb jetting for polini 210
hi all hope someone can help i am running a polini 210 alloy kit with standard si 24 carb,57mm crank fast flow tap have changed main jet to a 132 ,seems to run ok,apart from after being full throttle and then shutting off then trying to open throttle there is a deadspot for a couple of secs,also see...
- Sun Sep 24, 2017 1:03 pm
- Forum: Vespa Tech
- Topic: polini 210 carb options
- Replies: 7
- Views: 4695
Re: polini 210 carb options
cheers hungdog are you running one at the mo was wondering about a base line for jetting
any recommendations where to buy from
any recommendations where to buy from
- Sun Sep 24, 2017 9:38 am
- Forum: Vespa Tech
- Topic: polini 210 carb options
- Replies: 7
- Views: 4695
polini 210 carb options
Hi all I am running the new polini 210 alloy kit with standard 24si carb ,kit is running great but think it would benefit from a bigger carb ,seems a minefield when you start to find info on carbs, was after info of what others are running was looking at the new pinasco 28mm si carb but looks expens...
- Thu Feb 23, 2017 8:56 pm
- Forum: Vespa Tech
- Topic: polini 210 help
- Replies: 5
- Views: 3830
Re: polini 210 help
cheers mate
jets in the carb at present are 55/160 pilot /be3 atomiser/air corrector 160 was looking for advice on main as polini say 120 -125 which i thought would be on the lean side from what others have said,will the head bolts torque setting be the same as the cast iron kit?
thanks
jets in the carb at present are 55/160 pilot /be3 atomiser/air corrector 160 was looking for advice on main as polini say 120 -125 which i thought would be on the lean side from what others have said,will the head bolts torque setting be the same as the cast iron kit?
thanks
- Sun Feb 19, 2017 10:57 pm
- Forum: Vespa Tech
- Topic: polini 210 help
- Replies: 5
- Views: 3830
Re: polini 210 help
hi
was looking to up the main jet to around the 128 mark,was interested in what others were running that plus timings
cheers
was looking to up the main jet to around the 128 mark,was interested in what others were running that plus timings
cheers