Scooterotica

p2nm

https://www.sip-scootershop.com/en/prod ... +_242774j0

p2nm

was looking at the sip rear wheel conversion which comes with gts rim just wondering if it would make 4th gear longer
etc

p2nm

Hi all

Has anyone done the 12in wheel conversion and what effect did it have on gearing

thanks in advance

p2nm

hi all
fitted a temp sensor to my polini 210 just wondering if anybody knows what avg running temp should be and whats the max temp they can run at without a seizing up

cheers

p2nm

hi all

i have seen on the scooter service website they do an adapter to lower the front of a px by 15mm was wondering is there a way of lowering the rear

thanks in advance

p2nm

hi all hope someone can help i am running a polini 210 alloy kit with standard si 24 carb,57mm crank fast flow tap have changed main jet to a 132 ,seems to run ok,apart from after being full throttle and then shutting off then trying to open throttle there is a deadspot for a couple of secs,also see...

p2nm

cheers hungdog are you running one at the mo was wondering about a base line for jetting
any recommendations where to buy from

p2nm

Hi all I am running the new polini 210 alloy kit with standard 24si carb ,kit is running great but think it would benefit from a bigger carb ,seems a minefield when you start to find info on carbs, was after info of what others are running was looking at the new pinasco 28mm si carb but looks expens...

p2nm

cheers mate
jets in the carb at present are 55/160 pilot /be3 atomiser/air corrector 160 was looking for advice on main as polini say 120 -125 which i thought would be on the lean side from what others have said,will the head bolts torque setting be the same as the cast iron kit?

thanks

p2nm

hi
was looking to up the main jet to around the 128 mark,was interested in what others were running that plus timings

cheers

Search found 11 matches

Re: 12in wheel conversion

Re: 12in wheel conversion

12in wheel conversion

polini 210 temp

lower rear end

carb jetting for polini 210

Re: polini 210 carb options

polini 210 carb options

Re: polini 210 help

Re: polini 210 help

Login • Register

Advertising