Scooterotica

shipscat

hi peeps i need some pointers/advise on a "spaq/crap" front disc brake i've renovated a gp and now reassembling it i've got an issue with the front wheel not sitting central in the forks before disassembly there was an issue with the brake not working properly the caliper was sticking and ...

shipscat

i'm renovating a gp 150 for a friend that had an AF 230 kit it now has a cassa 225 that i have fitted , it already has a dellorto 34mm vshb , the side panel has a big f-off hole cut in it which is in the wrong place for the carb so it's going to be replaced with a new panel is it absolutley nessesar...

shipscat

recomendations for who makes the strongest centre stand crossmember the the original has a hideousley welded repair so much so it is now unrepairable without a s**t load of fabrication
if i could post a photo of it i would
thanks in advance

shipscat

thanks will have look

shipscat

is there such a thing as a small end bearing to convert a 16mm wrist pin to fit an 18mm con rod ?
if there is where do i get one from
thanks in advance

shipscat

hello peeps i've been doing work on a friends gp 150 fitting a sip speedo it has an ally 230/225 af rayspeed cylinder , read kit 34 mm carb , i removed the cylinder head so i could make the temp sensor fit and found lots of random pitting in the cylinder there's more of it above the main intake port...

shipscat

check out this guy
https://www.youtube.com/user/weldingtipsandtricks

shipscat

if you have an old inner-tube cut a piece big enough to cover bottom of the carb cut holes for the studs re-fit carb tighten down that's how i did it

shipscat

here you go
http://www.scooterlab.uk/engine-pressur ... heap-tech/

Search found 9 matches

spaq front disc brake issue

gp 150 with a casa 225 kit

gp 150 with a casa 225 kit

Re: small end bearing

small end bearing

info and opinions on af rayspeed cylinders

Re: Best weld rod for beefing up quatrini casing

Re: Vespa air leak kit

Re: Vespa air leak kit

Login • Register

Advertising