Search found 9 matches

by shipscat
Mon Sep 10, 2018 9:33 pm
Forum: Lambretta Tech
Topic: spaq front disc brake issue
Replies: 1
Views: 663

spaq front disc brake issue

hi peeps i need some pointers/advise on a "spaq/crap" front disc brake i've renovated a gp and now reassembling it i've got an issue with the front wheel not sitting central in the forks before disassembly there was an issue with the brake not working properly the caliper was sticking and causing br...
by shipscat
Sat Aug 11, 2018 9:42 pm
Forum: Scooterotica Tuning & Maintenance Information
Topic: gp 150 with a casa 225 kit
Replies: 1
Views: 727

gp 150 with a casa 225 kit

i'm renovating a gp 150 for a friend that had an AF 230 kit it now has a cassa 225 that i have fitted , it already has a dellorto 34mm vshb , the side panel has a big f-off hole cut in it which is in the wrong place for the carb so it's going to be replaced with a new panel is it absolutley nessesar...
by shipscat
Mon Jul 30, 2018 9:13 pm
Forum: General Scooter Chat
Topic: gp 150 with a casa 225 kit
Replies: 1
Views: 456

gp 150 with a casa 225 kit

recomendations for who makes the strongest centre stand crossmember the the original has a hideousley welded repair so much so it is now unrepairable without a s**t load of fabrication
if i could post a photo of it i would
thanks in advance
by shipscat
Tue Dec 26, 2017 6:55 pm
Forum: Lambretta Tech
Topic: small end bearing
Replies: 4
Views: 787

Re: small end bearing

thanks will have look
by shipscat
Tue Dec 26, 2017 5:40 pm
Forum: Lambretta Tech
Topic: small end bearing
Replies: 4
Views: 787

small end bearing

is there such a thing as a small end bearing to convert a 16mm wrist pin to fit an 18mm con rod ?
if there is where do i get one from
thanks in advance
by shipscat
Sat Dec 02, 2017 6:02 pm
Forum: Lambretta Tech
Topic: info and opinions on af rayspeed cylinders
Replies: 1
Views: 803

info and opinions on af rayspeed cylinders

hello peeps i've been doing work on a friends gp 150 fitting a sip speedo it has an ally 230/225 af rayspeed cylinder , read kit 34 mm carb , i removed the cylinder head so i could make the temp sensor fit and found lots of random pitting in the cylinder there's more of it above the main intake port...
by shipscat
Sat Jan 28, 2017 7:21 pm
Forum: Vespa Tech
Topic: Vespa air leak kit
Replies: 6
Views: 1841

Re: Vespa air leak kit

if you have an old inner-tube cut a piece big enough to cover bottom of the carb cut holes for the studs re-fit carb tighten down that's how i did it