Search found 30 matches
- Thu Mar 09, 2017 9:15 pm
- Forum: Lambretta Tech
- Topic: RB20 spitting fuel....everywhere
- Replies: 14
- Views: 5677
Re: RB20 spitting fuel....everywhere
Just back from hols and been reading the replies, I did think that a reed motor was more efficient and shouldn't spit fuel but will try a 30mm and see how it goes, thank for the advice
- Fri Mar 03, 2017 11:19 pm
- Forum: Lambretta Tech
- Topic: RB20 spitting fuel....everywhere
- Replies: 14
- Views: 5677
RB20 spitting fuel....everywhere
Have a RB20 built by AF and dynoed by Prodesign so I know it's running right, however it's mega thirsty and spits fuel everywhere which really p's me off, running a AF road pipe and 34mm Dellorto, runs real nice and am getting 24BHP which is fine but forever cleaning the running boards, did the IOW ...
- Fri Mar 03, 2017 10:58 pm
- Forum: Vespa Tech
- Topic: SiP Speedo in a new PX - where did you put the box ?
- Replies: 2
- Views: 1885
Re: SiP Speedo in a new PX - where did you put the box ?
Did the same, used some double sided tape and squeezed in behind the headlight
- Fri Mar 03, 2017 10:56 pm
- Forum: Vespa Tech
- Topic: Sip Speedo speed sensor fault
- Replies: 4
- Views: 3026
Re: Sip Speedo speed sensor fault
Yessssssss!!! That makes sense, it mentions something about refer to instruction sheet if using ext speedo sensor but no sheet supplied, bloody Germans! that must be it. Thanks for the help, one less problem to solve.
- Thu Mar 02, 2017 8:25 pm
- Forum: Vespa Tech
- Topic: Sip Speedo speed sensor fault
- Replies: 4
- Views: 3026
Sip Speedo speed sensor fault
Having some issues with my new sip speedo on my px. CHT works fine as does rev counter but spied signal is way out, I'm doing about 20mph and it only reads 6mph!!! I've used the sip speed sensor and tried moving the sensor nearer to the magnet but no difference, blue light is flicking do guess it's ...
- Thu Jan 05, 2017 8:00 pm
- Forum: Vespa Tech
- Topic: Setting SIP with battery
- Replies: 1
- Views: 1431
Setting SIP with battery
Just finished installing all the wiring got the SIP speedo on my PX, great fun!! All lights are on so looks good but instead of running the engine continuously whilst I'm setting up can I connect to a 12V car battery and enjoy the warmth of the garage rather than do it with the door open! My electri...
- Fri Dec 23, 2016 1:49 am
- Forum: Vespa Tech
- Topic: Malossi ignition timing
- Replies: 8
- Views: 3941
Re: Malossi ignition timing
Unfortunately it was damaged (i think) whilst at the tuners so it wouldn't start hence removing so at present I can't comment. I've tried to get another one but everywhere seems out of stock. Anyone know where I can get a replacement? I've tried their site and MB
- Thu Dec 22, 2016 12:02 am
- Forum: Vespa Tech
- Topic: Malossi ignition timing
- Replies: 8
- Views: 3941
Re: Malossi ignition timing
Never quite that simple is it. Thanks for the replies think Santa needs to bring a strobe gun for Christmas!!
- Wed Dec 21, 2016 7:11 pm
- Forum: Vespa Tech
- Topic: Malossi ignition timing
- Replies: 8
- Views: 3941
Malossi ignition timing
Quick question regarding my Malossi 221 engine. Had a Kytronik on it but stopped working so I need to revert back to static for the time being. Motor setup: Malossi 221 kit Maz 60mm web crank Pipe design charger exhaust MMW reedblock 34mm carb Unfortunately I don't have a strobe so I was thinking of...
- Fri Sep 02, 2016 9:21 pm
- Forum: Lambretta Tech
- Topic: bad vibrations
- Replies: 26
- Views: 9214
Re: bad vibrations
I fitted BGM and was ok then started suffering mea vibration on throttle side, almost couldn't grip. Turned out it was a loose flywheel cowling!!! Now sorted and no vibration at all