Scooterotica

wink

Sunrise, have you got the contact details for the soda blasting firm near biggin hill an d what was the cost?
Cheers W

wink

Juan, do you know if the PK forks need any modification to fit?

wink

Hi timeexit, Well I adjusted the outer cable and the speedo is still not working, I can actually hear/feel the inner moving in the outer cable so I can only assume that the actual speedo is buggered (it was old and untested). Looks like I'll have to try and get hold of another working mk1 speedo, to...

wink

Hi all, I've just fitted a new speedo cable to my PX mk one and I have replaced all the various components. When fitted from top down (headset first down to hub), I can turn the cable manually at the bottom of the cable and the speedo works fine, but as soon as I fit the cable into the hub the speed...

wink

Hi All, I'm just finishing off the restoration of the above and I now need to wire up the headset (with ignition key in the top) to the main loom. I have the three section of wires coming from the switches down to the lower loom and the horn, but can anyone tell me what the correct sequence is for t...

wink

Hi All, I have an early Mk2 PX (non autolube) that I want to convert to a Mk1 model. I have trimmed up a Mk 1 toolbox to fit, opened up holes for the fixing tabs for the horncast, but I also want to include a mk1 loom and headset top ignition (I was going to use the existing ignition, just as the st...

wink

Hi all, Can anyone advise the easiest way to fit a replacement Vespa legshield badge, the holes are already drilled is there a special tool (I know there is one for Lammies) ) Cheers Chris

wink

Is it ok to put a standard 3.50/10 Michelin S1tyre on the wider cosa rim and if so is there any real benefit and does there need to be any modification to the frame/ engine shocks etc.

wink

cheers Goldeneye, much appreciated. Chris..

wink

when you say "spinning wheel the other way " I take it you mean turning the the wheel in reverse (backwards, towards the bike)?

Search found 54 matches

Re: Rustoration Restoration

Re: barn find

Re: Problems with fitting a replacement PX Mk1 Speedo cable

Problems with fitting a replacement PX Mk1 Speedo cable

Wiring for 1979 Vespa PXMk1 headset ignition/front headlight

Converting a Vespa PX Mk2 EFL to a Mk1

Fitting a replacement Vespa legshield badge

Re: Wide RIMs from SIP for 1988 Vespa PX200

Re: Vespa PX/EFL Ignition Grub screw rusted into frame

Re: Speedo not working

Login • Register

Advertising