Scooterotica

nicholashay

Hi,

I have built a new engine. I need advice on the jetting. I have a Malossi 166 with a PM exhaust, Malossi reed valve. I have a 28 PHBH but need to know, main, pilot and choke jet sizes, slide size, float chamber size, needle and atomiser sizes. Any help would be greatly appreciated.

Thanks,
Nick

nicholashay

The petrol tap is a brand new SIP high flow tap, there is no extra in line filter or anything, so that should be Ok. The Piston and bore is unknown, But I had the barrel off only a month ago and they were not seized. Only about 15 miles on it since then, slow riding around town. Only in 4th for the ...

nicholashay

Hi, I have a new build, still riding in with only 25 miles on the clock. Revs out with good power in 1st, 2nd and 3rd. Power drops in 4th. Revs drop by about 2000 revs. Rapido Race 225 with Harry Barlow piston, Li150 gear box + 46/16 = 4.9 gear ratio. Tameni 60/110 racing crankshaft JL4 exhaust BGM ...

nicholashay

The AF Light Flywheel that weighs 1380g

nicholashay

Great, was that with a GP (Indian) engine. which shims did you use?

nicholashay

Can you use a BGM Stator plate with an AFR lightened flywheel on a Lambretta GP?

Search found 6 matches

Malossi 166 28 PHBH Jetting

Re: Rapido 225 Lack of top end power..Carb set up wrong?

Rapido 225 Lack of top end power..Carb set up wrong?

Re: BGM AFR Electronic Ignition

Re: BGM AFR Electronic Ignition

BGM AFR Electronic Ignition

Login • Register

Advertising