Search found 5 matches

by Kiwi
Thu Dec 14, 2017 12:07 am
Forum: Tech FAQ
Topic: sip sensor
Replies: 4
Views: 1506

Re: sip sensor

I’ve had mine for couple years now and using magnet on front hub my settings as follow ADJ 1 = F miles per hour ADJ 2 = EXT magnet ADJ 3 = Tyre size 1295 mm set to O.2P Ratio 00.77 ADJ 4 = P3 ADJ 5 = 24 hour clock Just a note to get Ratio of Ratio 00.77 you need to set it up first using ADJ 1 set as...
by Kiwi
Wed Dec 13, 2017 11:54 pm
Forum: Tech FAQ
Topic: LTH Reed Force V 3 Small carb
Replies: 0
Views: 408

LTH Reed Force V 3 Small carb

Is anybody running a LTH Reed V- Force 3 I’ve got a LTH B 2.0 small Reed Value and have just updated Reed value to LTH Reed V- Force 3 just asking do I need to alter jetting for the V- Force 3 Mikuni TMX 27mm Needle 5EL68 set to 3 Clip from top - Pilot 25 - Main 250 - Power 60 Air Screw 1.1/2 out Ea...
by Kiwi
Thu Jun 15, 2017 10:40 pm
Forum: Tech FAQ
Topic: port holes on mugello piston for reed value
Replies: 8
Views: 1840

Re: port holes on mugello piston for reed value

Not sure if Imola piston would work, but Ive got a new Mugello piston just got to decide which shop window a cut into side
by Kiwi
Wed Jun 14, 2017 11:26 pm
Forum: Tech FAQ
Topic: port holes on mugello piston for reed value
Replies: 8
Views: 1840

port holes on mugello piston for reed value

Hi Boys after bit of advice please as I have got to replace Mugello piston and my old Mugello piston had two oblong ports in the side of it for LTH Reed value, my question is, I'm I best cutting two in the new piston to same the shape as old one or would Oval ports or square ports be better ????? pi...
by Kiwi
Wed Jul 02, 2014 10:21 pm
Forum: Lambretta Tech
Topic: Lambretta sip speedo is it more hassle than its worth ??
Replies: 30
Views: 7863

Re: Lambretta sip speedo is it more hassle than its worth ??

Hi there I fitted one with fuel sensor - Temp sensor on spark plug - and fitted two magnets on front disc brakes got to say at first thought I was not getting correct speed but I was . If you compare speedo to old lambretta ones that said you were doing 75mph when you really weren't ... Got to say e...