Scooterotica

Selector arm pin was indeed out completely I assumed cos it was changing gears it was ok thanks for the advice norrie cheers.

Cheers for that checked pin is ok will look at the other when I back home.

Got a t5 classic set off few days ago first andsecond gear ok put into third and not engaging just revving . Occaisoinally it will engage sometimes no gears at all ! Checked selector that is changing to every gear fine going away tomorrow for a week but any ideas where to start when I return much ap...

Thanks smoore-gt225 I will give them a ring.

Hi wondering if anyone can help. I recently acquired a t5 mk1yankee style seat without the lock ! Is it possible to get these anymore??

Thanks for that jack221

I have recently fit a sip road exhaust on my vespa p200 have read conflicting reports about the timing some say it needs setting to 125 setting and some don't mention changing? Any advice please .

not bad

thanks for advice will try that when i get another gas bottle! not found anything obvious other than seals all very tough and brittle so hoping new seals will cure the running lean problem!

right got cracking on strip down everything out except the fly wheel side bearing! taken seal out and there is a lip which makes the outer race of the bearing impossible to get to and the inner collar is on the crank. can only get a drift onto the (barrel rollers) which is not enough to knock bearin...

Search found 14 matches

Re: clutch problem

Re: clutch problem

clutch problem

Re: t5 seat lock

t5 seat lock

Re: sip road exhaust

sip road exhaust

Re: MADSPEED PERFORMANCE No33 S2 PROJECT

Re: t5 running lean

Re: t5 running lean

Login • Register

Advertising