all bits ive tried came off working scoot, my mate checked wires and all seems fine, im at a total loss, going to put old tap back in and try that
Search found 13 matches
- Tue Apr 15, 2014 6:36 pm
- Forum: Vespa Tech
- Topic: help, scoot chugging, back firing
- Replies: 13
- Views: 4843
- Mon Apr 14, 2014 10:20 pm
- Forum: Vespa Tech
- Topic: help, scoot chugging, back firing
- Replies: 13
- Views: 4843
Re: help, scoot chugging, back firing
Forgot to write I've tried another carb and more fuel from different garage
- Mon Apr 14, 2014 9:45 pm
- Forum: Vespa Tech
- Topic: help, scoot chugging, back firing
- Replies: 13
- Views: 4843
Re: help, scoot chugging, back firing
thanks for reply but timing was marked and piston in right way, it runs ok at times then just starts chugging
- Mon Apr 14, 2014 9:03 pm
- Forum: Vespa Tech
- Topic: help, scoot chugging, back firing
- Replies: 13
- Views: 4843
help, scoot chugging, back firing
scoots running p155, chugging back firing after rebuild, tried cdi,stator,ht lead,plug, cases got cracked after a mate went ahead and tried to put main bearing in but got a top guy in uni to weld it seemed a good job fitted a sip fast flow tap to so wondering if its that, dont know what else to try ...
- Wed Dec 11, 2013 8:44 pm
- Forum: Vespa Tech
- Topic: Engine temperature question /issue
- Replies: 13
- Views: 6365
Re: Engine temperature question /issue
i run polini and 285 is my normal, had a seize at 390
i normally give rings about 100 mile when new
i normally give rings about 100 mile when new
- Mon Nov 11, 2013 10:56 pm
- Forum: General Scooter Chat
- Topic: Ricspeed - Rich Smith - Rest In Peace
- Replies: 133
- Views: 56489
Re: Ricspeed - Rich Smith - Rest In Peace
sad to hear, RIP
- Sun Oct 20, 2013 10:23 am
- Forum: Vespa Tech
- Topic: Polini longstroke 221cc top end
- Replies: 14
- Views: 7227
Re: Polini longstroke 221cc top end
silly me
- Sat Oct 19, 2013 10:05 pm
- Forum: Vespa Tech
- Topic: Polini longstroke 221cc top end
- Replies: 14
- Views: 7227
Re: Polini longstroke 221cc top end
run cast polini myself, ported and s**t by sean, good power 2s up with gear on
- Sat Oct 19, 2013 10:03 pm
- Forum: Vespa Tech
- Topic: Polini longstroke 221cc top end
- Replies: 14
- Views: 7227
- Mon Sep 02, 2013 1:14 pm
- Forum: Vespa Tech
- Topic: sip tubeless wheel nuts
- Replies: 2
- Views: 1607
sip tubeless wheel nuts
Has anyone noticed that some of the lips at bottom of nuts don't fit in the hole in the rims, I find if you try them with wheel on the ground to see if it sits in before trying to fit rims it saves a lot of swearing wondering why you can't get nut started