Search found 13 matches

by lesfaenaboombu
Tue Apr 15, 2014 6:36 pm
Forum: Vespa Tech
Topic: help, scoot chugging, back firing
Replies: 13
Views: 4731

Re: help, scoot chugging, back firing

all bits ive tried came off working scoot, my mate checked wires and all seems fine, im at a total loss, going to put old tap back in and try that
Image
by lesfaenaboombu
Mon Apr 14, 2014 10:20 pm
Forum: Vespa Tech
Topic: help, scoot chugging, back firing
Replies: 13
Views: 4731

Re: help, scoot chugging, back firing

Forgot to write I've tried another carb and more fuel from different garage
by lesfaenaboombu
Mon Apr 14, 2014 9:45 pm
Forum: Vespa Tech
Topic: help, scoot chugging, back firing
Replies: 13
Views: 4731

Re: help, scoot chugging, back firing

thanks for reply but timing was marked and piston in right way, it runs ok at times then just starts chugging
by lesfaenaboombu
Mon Apr 14, 2014 9:03 pm
Forum: Vespa Tech
Topic: help, scoot chugging, back firing
Replies: 13
Views: 4731

help, scoot chugging, back firing

scoots running p155, chugging back firing after rebuild, tried cdi,stator,ht lead,plug, cases got cracked after a mate went ahead and tried to put main bearing in but got a top guy in uni to weld it seemed a good job fitted a sip fast flow tap to so wondering if its that, dont know what else to try ...
by lesfaenaboombu
Wed Dec 11, 2013 8:44 pm
Forum: Vespa Tech
Topic: Engine temperature question /issue
Replies: 13
Views: 6288

Re: Engine temperature question /issue

i run polini and 285 is my normal, had a seize at 390
i normally give rings about 100 mile when new
by lesfaenaboombu
Mon Nov 11, 2013 10:56 pm
Forum: General Scooter Chat
Topic: Ricspeed - Rich Smith - Rest In Peace
Replies: 133
Views: 54917

Re: Ricspeed - Rich Smith - Rest In Peace

sad to hear, RIP
by lesfaenaboombu
Sun Oct 20, 2013 10:23 am
Forum: Vespa Tech
Topic: Polini longstroke 221cc top end
Replies: 14
Views: 7124

Re: Polini longstroke 221cc top end

silly me :D
by lesfaenaboombu
Sat Oct 19, 2013 10:05 pm
Forum: Vespa Tech
Topic: Polini longstroke 221cc top end
Replies: 14
Views: 7124

Re: Polini longstroke 221cc top end

run cast polini myself, ported and s**t by sean, good power 2s up with gear on
by lesfaenaboombu
Mon Sep 02, 2013 1:14 pm
Forum: Vespa Tech
Topic: sip tubeless wheel nuts
Replies: 2
Views: 1579

sip tubeless wheel nuts

Has anyone noticed that some of the lips at bottom of nuts don't fit in the hole in the rims, I find if you try them with wheel on the ground to see if it sits in before trying to fit rims it saves a lot of swearing wondering why you can't get nut started

cron