Search found 143 matches
- Fri Nov 11, 2016 3:50 pm
- Forum: Lambretta Tech
- Topic: Clubman exhausts...
- Replies: 63
- Views: 18716
Re: Clubman exhausts...
I'd really like to know in what the Gori 50 outperforms the BGM clubman v3. I run the BGM on my SIL 200 (phbh30 47/19 gp200box ) and pulls like a tractor in every condition.
- Wed Jul 06, 2016 5:58 pm
- Forum: Lambretta Tech
- Topic: won't shift into second
- Replies: 17
- Views: 6893
Re: won't shift into second
will do. thanks for the tips.
- Wed Jul 06, 2016 5:26 pm
- Forum: Lambretta Tech
- Topic: won't shift into second
- Replies: 17
- Views: 6893
Re: won't shift into second
auch! i havent checked the measure of the layshaft/ endplate shim gap , i thought it was unnecessary since all the other parts remained the same could that be the reason 
can bad shimming cause such a problem?
can bad shimming cause such a problem?- Wed Jul 06, 2016 4:52 pm
- Forum: Lambretta Tech
- Topic: won't shift into second
- Replies: 17
- Views: 6893
Re: won't shift into second
since rebuild. i changed the rear hub bearing to a casa one and fit it all back on together again. i can shift thtough all gears with the exception of the 2nd so i doubt this has anything to do with the arm or the loose gear position..
- Wed Jul 06, 2016 4:14 pm
- Forum: Lambretta Tech
- Topic: won't shift into second
- Replies: 17
- Views: 6893
Re: won't shift into second
i took the pic with the mobile using tapatalk on the mobile is very clear , don t know from other devices
- Wed Jul 06, 2016 4:11 pm
- Forum: Lambretta Tech
- Topic: won't shift into second
- Replies: 17
- Views: 6893
- Wed Jul 06, 2016 3:51 pm
- Forum: Lambretta Tech
- Topic: won't shift into second
- Replies: 17
- Views: 6893
Re: won't shift into second
is probably about 75 percent not 90 degrees
- Wed Jul 06, 2016 3:51 pm
- Forum: Lambretta Tech
- Topic: won't shift into second
- Replies: 17
- Views: 6893
Re: won't shift into second
The arm is not aligning perfectly with the crankcase stud. Could this be the reason? Should I open the engine.
- Wed Jul 06, 2016 3:49 pm
- Forum: Lambretta Tech
- Topic: won't shift into second
- Replies: 17
- Views: 6893
Re: won't shift into second
the picture is unclear 
- Tue Jul 05, 2016 7:32 pm
- Forum: Lambretta Tech
- Topic: won't shift into second
- Replies: 17
- Views: 6893
Re: won't shift into second
thanx for answering, i rebuilt it myself and im sure they are in the correct way around. i could spin the gearbox freely by hand, is this a typical sympthom of fitting gears wrong way round ? all other thee gears engage well...