Search found 13 matches
- Thu Jul 22, 2010 9:22 pm
- Forum: Carburettor Set-ups
- Topic: VHSA 32 on cast iron piston ported
- Replies: 0
- Views: 1110
VHSA 32 on cast iron piston ported
Would please like to hear advice on needle for VHSA 32 on piston ported engines. From my understanding the K7 needle would probably be too fat. DQ 262 and K24 needle? Good starting point? Is a 150 barrel so the range of 150 to 200 cc would be in the same low speed range on the needle I think. thanks...
- Mon Sep 21, 2009 6:02 pm
- Forum: Lambretta Tech
- Topic: mugello 186 port map
- Replies: 4
- Views: 1971
Re: mugello 186 port map
a brief hint of the timings, thanks a lot!
would prefer a port map though, but I'll try to get a hand of one.
cheers
Truls
would prefer a port map though, but I'll try to get a hand of one.
cheers
Truls
- Mon Sep 21, 2009 4:00 pm
- Forum: Lambretta Tech
- Topic: mugello 186 port map
- Replies: 4
- Views: 1971
Re: mugello 186 port map
Up up 
as said would be much appreciated.
or nearly as helpful
- the distance from port top egde to barrel top edge measured with a vernier caliper just inside of the chamfer in the port openings.
cheers
Truls
as said would be much appreciated.
or nearly as helpful
- the distance from port top egde to barrel top edge measured with a vernier caliper just inside of the chamfer in the port openings.
cheers
Truls
- Fri Sep 18, 2009 2:10 am
- Forum: Lambretta Tech
- Topic: mugello 186 port map
- Replies: 4
- Views: 1971
mugello 186 port map
would be much appreciated.
need not only for curiosity
cheers
Truls
need not only for curiosity
cheers
Truls
- Wed Apr 01, 2009 1:57 pm
- Forum: Lambretta Tech
- Topic: VHSA 32 modifications
- Replies: 6
- Views: 3472
Re: VHSA 32 modifications
Yes I noticed the plastic guide was interchangeable... allthough most of the wear is still on the slide... somewhat strange. on the other hand, it appeared to be bloody hard to get parts for these nowadays. Five dellorto dealers here in sweden and none of them have the parts in stock. any hints on a...
- Sun Mar 29, 2009 10:02 pm
- Forum: Lambretta Tech
- Topic: VHSA 32 modifications
- Replies: 6
- Views: 3472
Re: VHSA 32 modifications
Thanks alot for the answers.
I think the carb body is fine, as most of the wear seems to be on the slide.
The other parts will be fitted new, if a decent carb doesn't show up for a fair price.
cheers
Truls
I think the carb body is fine, as most of the wear seems to be on the slide.
The other parts will be fitted new, if a decent carb doesn't show up for a fair price.
cheers
Truls
- Sun Mar 29, 2009 3:09 pm
- Forum: Lambretta Tech
- Topic: VHSA 32 modifications
- Replies: 6
- Views: 3472
VHSA 32 modifications
Hi all. I was helping a mate with his carb, and it was totally worn out. Needle impossible to identify and the slide was jerking in the carb about 4-5 mm. Neither did this carb have a 350 float seat and needle and the fuel supply hole was not bored out. The question is how this carb will behave on a...
- Fri Feb 06, 2009 10:15 am
- Forum: Lambretta Tech
- Topic: Compression height on KH750 piston
- Replies: 28
- Views: 7688
Re: Compression height on KH750 piston
Dome is 3mm if I dont remember wrong.
though wiseco always specs their dome with a radius,
i have a drawing of this piston, but i have to look after it.
though wiseco always specs their dome with a radius,
i have a drawing of this piston, but i have to look after it.
- Mon Jan 19, 2009 2:33 am
- Forum: Lambretta Tech
- Topic: Port Maps - RB20/22/25 & TS1
- Replies: 5
- Views: 7298
Re: Port Maps - RB20/22/25 & TS1
You do for certain struggle to make this forum great!
And it is!
Thanks Dan.
Good information!
cheers
Truls
And it is!
Thanks Dan.
Good information!
cheers
Truls
- Fri Jan 16, 2009 12:40 am
- Forum: Lambretta Tech
- Topic: RB25 (250) - Pictures & Spec....
- Replies: 17
- Views: 11674
Re: RB25 (250) - Pictures & Spec....
Brilliant Dan!
A lot of useful information and a nice comparison!
cheers
Truls
A lot of useful information and a nice comparison!
cheers
Truls