Did you get sorted in the end?
Got same issues, had a bit of a brake for a year or two, thought I’d have another go but now I’ve no brake
Any tips with this pm calliper?
Search found 29 matches
- Sat Jun 09, 2018 6:15 pm
- Forum: Vespa Tech
- Topic: PM Tuning PX Front Brake Caliper
- Replies: 8
- Views: 5129
- Wed May 30, 2018 12:35 am
- Forum: Vespa Tech
- Topic: Vespa PX speedo drive retaining bolt
- Replies: 1
- Views: 1455
Vespa PX speedo drive retaining bolt
The small bolt at the forks has snapped and refused to come out. I tried drill so I could tap it again but it started to go offline. Question is can I wedge in the metal barrel and rubber bung so to keep the drive in place. Is there much force when spinning and will this just pop them out? Cheers Se...
- Fri Apr 06, 2018 1:36 pm
- Forum: Vespa Tech
- Topic: Sterling exhaust conversion
- Replies: 2
- Views: 1671
Re: Sterling exhaust conversion
Oh yeah, cheers mate
- Fri Apr 06, 2018 11:06 am
- Forum: Vespa Tech
- Topic: Sterling exhaust conversion
- Replies: 2
- Views: 1671
Sterling exhaust conversion
I’ve a sterling exhaust for P range. I’ve seen Beedspeed (I’m sure others do too) do a piece to adapt to px exhausts to fit T5 barrel.
Would this be possible for the sterling? And for running a polini 152?
Would this be possible for the sterling? And for running a polini 152?
- Fri Jan 05, 2018 9:42 pm
- Forum: Vespa Tech
- Topic: PX leaking oil through breather nut
- Replies: 2
- Views: 2547
PX leaking oil through breather nut
Asking for friend PX was pushing oil out the breather when the engine warmed up oil level was correct. Initially thought could be clutch side oilseal leaking air and building up pressure inside engine, hence pushing out oil once pressure reached. Checked the engine, stripped and rebuilt replaced all...
- Sun Oct 15, 2017 10:11 pm
- Forum: Vespa Tech
- Topic: Engine stand
- Replies: 1
- Views: 1702
Re: Engine stand
Also Lammy engine stand measurements if anyone can help
cheers
cheers
- Sun Oct 15, 2017 9:57 pm
- Forum: Vespa Tech
- Topic: Vespa PX200 disc... Electrics question
- Replies: 2
- Views: 2184
Re: Vespa PX200 disc... Electrics question
Sorted, was the earth wire under flywheel cowling
- Sun Oct 15, 2017 6:00 pm
- Forum: Vespa Tech
- Topic: Engine stand
- Replies: 1
- Views: 1702
Engine stand
Seen a variety of stands for working on the engine and I'm interested in making one. I'm on a short welding course so have access to materials etc. Has anyone any images with dimensions so that I can weld one up, plus any other tools etc for ideas so that I can make the most use of my time on the co...
- Wed Jun 07, 2017 4:43 pm
- Forum: Vespa Tech
- Topic: Vespa PX200 disc... Electrics question
- Replies: 2
- Views: 2184
Vespa PX200 disc... Electrics question
With the px engine off with ignition on the horn has stopped working along with no electric start. Kick start it, all lights work and horn faintly sounds if revved up. I've charged battery which is reading 12.41 and put new fuse in beside it. Any ideas?
- Sat Apr 02, 2016 12:38 pm
- Forum: Lambretta Tech
- Topic: Li Series 1 headlight question
- Replies: 0
- Views: 1132
Li Series 1 headlight question
I've a series 2 headlight, the rim wouldn't fit the series 1 but would the glass unit fit a series 1 rim? Save me buying the whole lot for the series 1