Search found 373 matches

by Norrie Bodge
Thu Oct 18, 2018 5:43 pm
Forum: Vespa Tech
Topic: P200e issue!
Replies: 40
Views: 2737

Re: P200e issue!

Clutch plates worn out Would that not cause problems in each gear? Problem only occurs at WOT in 4th! Can anyone tell me how I can pick up 2 or more quotes to respond to. Only seem to be able to do 1 at a time! :?: True But you are putting the motor under more load the faster you go! 3plate clutche...
by Norrie Bodge
Wed Oct 17, 2018 9:30 pm
Forum: Vespa Tech
Topic: P200e issue!
Replies: 40
Views: 2737

Re: P200e issue!

Clutch plates worn out
by Norrie Bodge
Mon Oct 15, 2018 8:45 am
Forum: Vespa Tech
Topic: Front tire wear P200e
Replies: 2
Views: 279

Re: Front tire wear P200e

Fit. New bearings into hub & hub backing plate
by Norrie Bodge
Fri Sep 21, 2018 8:33 am
Forum: Vespa Tech
Topic: Crank won’t turn when flywheel nut is tightened.
Replies: 6
Views: 466

Re: Crank won’t turn when flywheel nut is tightened.

Possibly if the crank is twisted ?
can you not try the new flywheel on a mates bike to see if it fits & runs ok
by Norrie Bodge
Tue Sep 18, 2018 10:24 pm
Forum: Vespa Tech
Topic: Malossi mhr cylinder tune...
Replies: 7
Views: 542

Re: Malossi mhr cylinder tune...

Image



Image
by Norrie Bodge
Tue Sep 18, 2018 10:17 pm
Forum: Vespa Tech
Topic: Malossi mhr cylinder tune...
Replies: 7
Views: 542

Re: Malossi mhr cylinder tune...

Fettle the piston as worb5 do on there tunes, makes a great increase to performance
by Norrie Bodge
Fri Aug 17, 2018 10:50 am
Forum: Lambretta Tech
Topic: TS1 225 Crankshaft........ideas
Replies: 12
Views: 794

Re: TS1 225 Crankshaft........ideas

Be interesting how it performs when sorted m8

Post up how it goes plz
by Norrie Bodge
Thu Aug 16, 2018 5:30 pm
Forum: Tech FAQ
Topic: Can I fit Vespa 125/150 pipes onto a 200 and if so, what do I need to do??
Replies: 4
Views: 404

Re: Can I fit Vespa 125/150 pipes onto a 200 and if so, what do I need to do??

On certain pipes that have a sprung downpipe yes
Done it for a mate who bought a revolver pipe
by Norrie Bodge
Thu Aug 16, 2018 2:58 pm
Forum: Lambretta Tech
Topic: TS1 225 Crankshaft........ideas
Replies: 12
Views: 794

Re: TS1 225 Crankshaft........ideas

holty wrote:
Wed Aug 15, 2018 10:27 pm
or you could use the granturismo 62mm crank, fitted one to my mates rb20, didnt have to machine the case at all
How did this perform m8 with 62mm crank?

What packers where used? & what was ya mates full setup etc plz ;-)