Search found 6 matches
- Thu Nov 08, 2012 5:11 pm
- Forum: Vespa Tech
- Topic: SiP Digital Speedo
- Replies: 4
- Views: 1520
Re: SiP Digital Speedo
acewell do a digi speedo etc. try roger at pro-design in littlehampton. fits into px lusso headset, apparently. not cheap though.
- Wed Oct 10, 2012 3:58 pm
- Forum: Vespa Tech
- Topic: MPG from a malossi 210 engine?
- Replies: 30
- Views: 9606
Re: MPG from a malossi 210 engine?
lad up our way(liverpool) just had an 11ltr tank fitted by pete at psl. needs pump etc. got tank from scootertrumps. pump etc all comes with it. with some of the mpg's quoted here that may be the way to go. as stated though, polini is the future.
- Wed Oct 10, 2012 3:26 pm
- Forum: Vespa Tech
- Topic: PX200 engine, T5 or PX 125? Fast tourer with good MPG.
- Replies: 21
- Views: 7792
Re: PX200 engine, T5 or PX 125? Fast tourer with good MPG.
wish i could find one of those 70mph std p2's. I'd save a ****kin fortune. my polini 220 only just tops it. 75 on px disc speedo= 68 gps. 80 = 72. on mine anyway. not set up for top end anyway, but if it were, wouldn't expect much more.
- Mon Oct 08, 2012 4:43 pm
- Forum: Vespa Tech
- Topic: RZ EVO 2000 LH EXHAUSTS( from sip/ jl made
- Replies: 1
- Views: 1597
RZ EVO 2000 LH EXHAUSTS( from sip/ jl made
anyone got any feedback on how these pipes perform, what set ups they work with etc. i know the rh rz's and revolvers are decent pipes but a bit peaky. i do prefer lh pipes though, looks wise and sound,( a bit deeper, barry white as opposed to beegees or bronski beat), even though they need to be re...
- Mon Oct 08, 2012 4:17 pm
- Forum: Vespa Tech
- Topic: barlow stage four set ups
- Replies: 85
- Views: 33113
Re: barlow stage four set ups
is it the new 218 kit with 60 crank or the older one with the packer your discussing? i've had, still got both. ran pretty much the same jetting in both, bar a bigger main in the 218(great bit of kit) 126 main be3 160ac 60/160 pilot for the 218 and 122 main on the 200 both set ups with std p2 gearin...
- Mon Oct 08, 2012 3:58 pm
- Forum: Vespa Tech
- Topic: new polini ally kit for p200
- Replies: 7
- Views: 2720
Re: new polini ally kit for p200
I'm running an alloy polini with long stroke, 221cc, 0.5 base packer and 1mm head with si26 carb, 130 main be3 160ac 60/160 idle and a sip road. circa 15bhp and 14lb 18degree ign. lovely motor to ride. not quite as torquey as the cast kit i had on,but sits all day at 60/65 real with plenty left for ...