Scooterotica

DMC

Google it mate, loads of videos on youtube.

DMC

Does the 'short' bracket need to be bent at 90 degrees? with the round hole fitting to the lower rear damper mount? Only way I can see it fitting.

DMC

I ran one when they came out but we all changed them as they broke the back mounts and restricted the exhaust which could explain the heat issue your having. We put leo vinces on if that helps.

DMC

This stuff seems to be as good if not better than the old nitromores:
http://www.artemisproducts.co.uk/boden- ... itres.html

bit of a discussion on paint removal here:
http://www.mig-welding.co.uk/forum/show ... hp?t=35789

DMC

This seems to have moved on a bit. Has anyone got a real price yet?

http://www.lambretta.it/_pdf/Misano%20S ... Layout.pdf

DMC

Not bad Fred,i'm still p1551ing about with engines. The reason i asked for a photo is I had a NK on my Suzuki 225 for years and the original swan neck spacers fell to bits the morning of a rally and the only thing I had in the shed that was rubber was an inner tube. So I cut out two pieces that matc...

DMC

fred wrote:Hello all,the rubber washers that fit between my expansion chamber(nk),and crankcase bracket have fallen apart. What alternatives could i use? I was thinking of grinding some jl bushes down.
cheers,fred

you got a photo of what you need Fred? or where it needs to fit.

DMC

Sorry for hijacking the thread guys but do you recognise this Magalluf?

DMC

As warts says, degassing tablets are a must especially if your using old scrap. I used flux as well, a couple of table spoons on top of the melted ally. This may be of interest to you, I'll leave it on to the weekend. https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B09...

DMC

Dont do it mate, you'll be in for a shock!

Search found 67 matches

Re: Dummies guide to checking port timings

Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba

Re: MSC Micron?

Re: powder coat

new engine

Re: rubber for exhaust bracket

Re: rubber for exhaust bracket

Re: Matt grey

Re: Sand casting in our workshop!

Re: Dye to show hairline cracks

Login • Register

Advertising