Martin, sorry for the delay in replying. I have sent you a PM with settings after Cadwell Park races, hope they help.
Andy
Search found 144 matches
- Wed Jan 10, 2018 9:02 am
- Forum: Carburettor Set-ups
- Topic: VHSH emulsion tube?
- Replies: 8
- Views: 4997
- Tue Dec 05, 2017 9:05 am
- Forum: Carburettor Set-ups
- Topic: 25 phbl advice
- Replies: 2
- Views: 2911
Re: 25 phbl advice
A mate of mine has a similar set up running the following settings;
MJ 98, P 51, Atomiser AQ266, Needle D22 2nd clip, Slide 40, Float jet 200.
this was set up on the dyno and runs very well.
Andy
MJ 98, P 51, Atomiser AQ266, Needle D22 2nd clip, Slide 40, Float jet 200.
this was set up on the dyno and runs very well.
Andy
- Thu Nov 16, 2017 9:03 am
- Forum: General Scooter Chat
- Topic: Nordlock washers
- Replies: 37
- Views: 11437
Re: Nordlock washers
Might be worth checking that the nut isn't bottoming out on the stud, you think its tight but in fact the stud is up against the inside of the nut. I had one that hit the stud, so drilled the ends out of the nuts to be sure they tightened down correctly.
- Sun Oct 15, 2017 9:21 pm
- Forum: Lambretta Tech
- Topic: AF Race clutch plates
- Replies: 2
- Views: 1844
AF Race clutch plates
Does anyone know what clutch the plates and steels originally came from (Honda, Suszuki etc) as they look very similar to the ones found in a CR 125. AF don't have stock, so looking for another source.
Any ideas, cheers.
Any ideas, cheers.
- Thu Sep 28, 2017 12:42 pm
- Forum: Lambretta Tech
- Topic: Drive chain recommendation
- Replies: 2
- Views: 1925
Re: Drive chain recommendation
You will need either stretched 82 link chain, or use a 83 with a pull down tensioner.
- Thu Sep 28, 2017 7:52 am
- Forum: Lambretta Tech
- Topic: No spark !
- Replies: 11
- Views: 4950
Re: No spark !
Had the same thing on my BSSO RB 20 race engine at the weekend, we changed everything and in the end checked the pick up height. Had to add 4 shims and then it fired into life and ran faultlessly all weekend.
Andy
Andy
- Wed Aug 02, 2017 2:21 pm
- Forum: Scooterotica Tuning & Maintenance Information
- Topic: SIL cast iron reed conversion
- Replies: 4
- Views: 4164
Re: SIL cast iron reed conversion
I have converted a 200 barrel to 225 with a small Atomic reed assembly, fitted a TS1 piston, 28mm PHBH and Taffy copy exhaust. it took me to Italy and back for the Euro. Admittedly it only had just over 200 miles running in on it when we left and it did seize solid after 100 miles in France (55mph o...
- Wed Aug 02, 2017 7:48 am
- Forum: Carburettor Set-ups
- Topic: VHSH emulsion tube?
- Replies: 8
- Views: 4997
Re: VHSH emulsion tube?
Cheers Garry this is for my race RB20 race engine in the BSSO Production Class, new jets have been ordered.
- Wed Aug 02, 2017 7:41 am
- Forum: Lambretta Tech
- Topic: Clutch bronze bush
- Replies: 5
- Views: 2040
Re: Clutch bronze bush
I have just fitted a std type bush to my Production Class race engine that has an AF 6 plate clutch with no issues.
- Tue Jul 25, 2017 9:05 am
- Forum: Carburettor Set-ups
- Topic: VHSH emulsion tube?
- Replies: 8
- Views: 4997
Re: VHSH emulsion tube?
Cheers for the reply Garry, did you have to change (smaller/bigger size) the pilot to compensate for no emulsion tube?