Search found 144 matches

by Andy W
Wed Jan 10, 2018 9:02 am
Forum: Carburettor Set-ups
Topic: VHSH emulsion tube?
Replies: 8
Views: 1559

Re: VHSH emulsion tube?

Martin, sorry for the delay in replying. I have sent you a PM with settings after Cadwell Park races, hope they help.
Andy
by Andy W
Tue Dec 05, 2017 9:05 am
Forum: Carburettor Set-ups
Topic: 25 phbl advice
Replies: 2
Views: 860

Re: 25 phbl advice

A mate of mine has a similar set up running the following settings;
MJ 98, P 51, Atomiser AQ266, Needle D22 2nd clip, Slide 40, Float jet 200.
this was set up on the dyno and runs very well.
Andy
by Andy W
Thu Nov 16, 2017 9:03 am
Forum: General Scooter Chat
Topic: Nordlock washers
Replies: 37
Views: 3605

Re: Nordlock washers

Might be worth checking that the nut isn't bottoming out on the stud, you think its tight but in fact the stud is up against the inside of the nut. I had one that hit the stud, so drilled the ends out of the nuts to be sure they tightened down correctly.
by Andy W
Sun Oct 15, 2017 9:21 pm
Forum: Lambretta Tech
Topic: AF Race clutch plates
Replies: 2
Views: 797

AF Race clutch plates

Does anyone know what clutch the plates and steels originally came from (Honda, Suszuki etc) as they look very similar to the ones found in a CR 125. AF don't have stock, so looking for another source.
Any ideas, cheers.
by Andy W
Thu Sep 28, 2017 12:42 pm
Forum: Lambretta Tech
Topic: Drive chain recommendation
Replies: 2
Views: 746

Re: Drive chain recommendation

You will need either stretched 82 link chain, or use a 83 with a pull down tensioner.:)
by Andy W
Thu Sep 28, 2017 7:52 am
Forum: Lambretta Tech
Topic: No spark !
Replies: 11
Views: 1869

Re: No spark !

Had the same thing on my BSSO RB 20 race engine at the weekend, we changed everything and in the end checked the pick up height. Had to add 4 shims and then it fired into life and ran faultlessly all weekend.
Andy
by Andy W
Wed Aug 02, 2017 2:21 pm
Forum: Scooterotica Tuning & Maintenance Information
Topic: SIL cast iron reed conversion
Replies: 4
Views: 1508

Re: SIL cast iron reed conversion

I have converted a 200 barrel to 225 with a small Atomic reed assembly, fitted a TS1 piston, 28mm PHBH and Taffy copy exhaust. it took me to Italy and back for the Euro. Admittedly it only had just over 200 miles running in on it when we left and it did seize solid after 100 miles in France (55mph o...
by Andy W
Wed Aug 02, 2017 7:48 am
Forum: Carburettor Set-ups
Topic: VHSH emulsion tube?
Replies: 8
Views: 1559

Re: VHSH emulsion tube?

Cheers Garry this is for my race RB20 race engine in the BSSO Production Class, new jets have been ordered.
by Andy W
Wed Aug 02, 2017 7:41 am
Forum: Lambretta Tech
Topic: Clutch bronze bush
Replies: 5
Views: 673

Re: Clutch bronze bush

I have just fitted a std type bush to my Production Class race engine that has an AF 6 plate clutch with no issues.
by Andy W
Tue Jul 25, 2017 9:05 am
Forum: Carburettor Set-ups
Topic: VHSH emulsion tube?
Replies: 8
Views: 1559

Re: VHSH emulsion tube?

Cheers for the reply Garry, did you have to change (smaller/bigger size) the pilot to compensate for no emulsion tube?