Search found 96 matches

by AndyS
Sat Aug 23, 2014 6:46 pm
Forum: Lambretta Tech
Topic: SIP Speedo
Replies: 14
Views: 3632

Re: SIP Speedo

Mike, as Minority kindly pointed out if you have a speed sensor, you need to count the amount of pulses, per revolution, when the blue led goes on. Set that in the same section as the wheel diameter, it has a setting of 05p, just change that to the amount of pulses. Must thanks Minority for his Gret...
by AndyS
Sat Aug 16, 2014 9:20 pm
Forum: Lambretta Tech
Topic: SIP Speedo
Replies: 14
Views: 3632

Re: SIP Speedo

Thanks for that. , I'll gives it a go tomorrow
by AndyS
Sat Aug 16, 2014 8:19 am
Forum: Lambretta Tech
Topic: SIP Speedo
Replies: 14
Views: 3632

Re: SIP Speedo

I was just a bit confused which setting to change , there is tyre circumference, and gear ratio. Which setting would you change when the sensor is seeing multiple bolts .
Thanks
by AndyS
Fri Aug 15, 2014 7:09 pm
Forum: Lambretta Tech
Topic: SIP Speedo
Replies: 14
Views: 3632

Re: SIP Speedo

I have just fitted one using the 'active sensor' as supplied by sip it is the AS 07 one. My thinking was that it doesn't need a magnet, and it just senses the movement of bolts etc from the wheel as they go past, but I could be wrong because I am struggling to get the speed to read accurately. Any o...
by AndyS
Thu Aug 14, 2014 9:42 pm
Forum: Show us yer Scoots!!
Topic: New project, Vespa VBB
Replies: 5
Views: 1497

Re: New project, Vespa VBB

The mudguard fixing holes were different, and the hole at the top had to be altered, the fixing holes at the side also had to be altered. The hole at the top had to be made bigger due to the fork size in that area, it was then a case if getting the forks fitted right and fitting the mudguard to them...
by AndyS
Wed Aug 13, 2014 8:01 pm
Forum: Show us yer Scoots!!
Topic: New project, Vespa VBB
Replies: 5
Views: 1497

New project, Vespa VBB

Here are some photos of my latest project https://flickr.com/photos/126082949@N05/sets/72157646022319240 Hope the link works ! It is a Vespa Vbb, px forks modified to fit, shortened, steering stops etc Disc brake, headset modified to take master cylinder Led rear light SIP digital speedo SIP Tubeles...
by AndyS
Fri Jun 13, 2014 1:34 pm
Forum: Vespa Tech
Topic: Sip tubeless nuts
Replies: 5
Views: 744

Re: Sip tubeless nuts

Thanks for the suggestions will try them
by AndyS
Fri Jun 13, 2014 11:32 am
Forum: Vespa Tech
Topic: Sip tubeless nuts
Replies: 5
Views: 744

Sip tubeless nuts

I need some wheel nuts for Sip tubeless rims I have got. Can anyone suggest a dealer, other than Sip who can supply them, or alternatively, can anyone suggest an alternative to the Sip nut which will work
Thanks
by AndyS
Thu Mar 06, 2014 10:31 pm
Forum: Vespa Tech
Topic: Malossi mhr 210 kit
Replies: 74
Views: 12682

Re: Malossi mhr 210 kit

Can I ask where you bought it from, does it come with a head ?
Thanks
by AndyS
Thu Jan 09, 2014 10:05 pm
Forum: Paint & Bodywork Tech
Topic: Paint
Replies: 17
Views: 3754

Re: Paint

I used one of the Aldi compressors and a cheap ( £25) spray gun to spray a vespa I bought, that ended up winning best paint at Bridlington. It's not as difficult as you think, take it steady and practice as you go along. I used candy paint, graphics etc looked fine. Have a go see what happens http:/...