Scooterotica

gppaul

has anybody got pictures of one fitted to a scoot

gppaul

i had the same problem with my TS1, long range tank, LTH manifold and TMX 35 carb, in the end I took my tank to a local garage and had them remove and make the carb cut out deeper.

gppaul

thank you, why is it never easy, they sell you something with no instructions, brilliant, also got one of those beluga timing tools, you guessed it, no instructions.

gppaul

thanks, I will have a look later.

gppaul

has anybody used one of those new timing tools, if so how and where can I find some instructions ?

gppaul

I have just got one of those SIP front hub driven speed sensors, first problem is that the knurled nut is to big for my PM tuning front hub, I've got over that hurdle, next problem is how do I set it up, I got instructions for standard cable and I've set my other scooter with the magnet type,

gppaul

thanks for your reply, I hope not, I run all my cables and loom through the frame, but I will pull the speedo wiring out at the weekend, great.

gppaul

cheers for the reply, I tried that I even changed the plug cap, I have a spare SIP speedo in the shed (don't ask) so thought I'd try swapping the power box, only one of the connectors is the same so I couldn't use it, I'm wondering if its my BGM rectifer not working properly. back in the shed at the...

gppaul

help. my SIP speedo has been working fine for about a year now, last week it started playing up, after about less then half a mile the rev counter starts very slowly moving to max and the speed says 124mph,the button during this episode does'nt work, I'm using a BGM stator and rectifier, as I say it...

gppaul

make sure you fit S2 cones, S3 stick out to far, S2 don't have a chamfered edge.

Search found 12 matches

Re: Easy clutch

Re: SS250 build - carb won’t fit

Re: sip sensor

Re: beluga

beluga

sip sensor

Re: sip speedo

Re: sip speedo

sip speedo

Re: BGM silent blocks too big?

Login • Register

Advertising