Search found 9 matches
- Sat Jun 16, 2012 7:40 am
- Forum: Lambretta Tech
- Topic: Mugello 200 28phbh jetting help.
- Replies: 4
- Views: 2023
Re: Mugello 200 28phbh jetting help.
Thanks, it's only so I can get it running somewere neat before getting dyno'd
- Fri Jun 15, 2012 9:38 am
- Forum: Lambretta Tech
- Topic: Mugello 200 28phbh jetting help.
- Replies: 4
- Views: 2023
Mugello 200 28phbh jetting help.
Bought a 28phbh to replace my 25phbh, will be runing a standard mugello 200, clubman pipe and a 28phbh with a ram air filter.
Does anyone have the same setup and could point me in the right direction for jetting please?
Does anyone have the same setup and could point me in the right direction for jetting please?
- Wed May 09, 2012 6:43 am
- Forum: Lambretta Tech
- Topic: BGM coil and regulator
- Replies: 0
- Views: 1465
BGM coil and regulator
Need a new cdi and regulator and came across the bgm ones, currently using a bgm stator which I'm impressed with so thought I may give these ago.
Has anyone tried these, some feed back would be great?
Has anyone tried these, some feed back would be great?
- Sun Apr 29, 2012 9:02 pm
- Forum: Show us yer Scoots!!
- Topic: My new headset/speedo
- Replies: 50
- Views: 17515
Re: My new headset/speedo
Understand it now, cheers
- Sun Apr 29, 2012 8:19 pm
- Forum: Show us yer Scoots!!
- Topic: My new headset/speedo
- Replies: 50
- Views: 17515
Re: My new headset/speedo
Is there some sort of bearing or bush in the caliper carrier to allow it to pivot? Are you disc or drum links? Thanks for help, trying to understand how scoot rs have got it to work. I'm using disc links so don't have a locating bolt on my links, this is on the current carrier, on there new anti div...
- Sun Apr 29, 2012 7:25 pm
- Forum: Show us yer Scoots!!
- Topic: My new headset/speedo
- Replies: 50
- Views: 17515
Re: My new headset/speedo
Been looking at the scoot rs site but its hard to see, what is stopping the speedo unit from spinning round as now the locater on the calliper carrier for the disc link and speedo is not there? hope this makes sense.
- Mon Apr 09, 2012 9:17 pm
- Forum: Show us yer Scoots!!
- Topic: My new headset/speedo
- Replies: 50
- Views: 17515
Re: My new headset/speedo
How did you mount the rose joint to the folks, hopefully going to be doing this very shortly and looking for ideas.bizzly wrote:Craig H wrote:Scoot RS anti dive done properly
![]()
- Mon Apr 09, 2012 8:57 pm
- Forum: Lambretta Tech
- Topic: ts1 225 to 240
- Replies: 13
- Views: 6578
Re: ts1 225 to 240
Recently done mine to a 240 (238) for this season, spec is: 71mm touring tune by chisel speed running no gaskets 60-115 mb crank 30mm mikuni Taffy pipe m tech Dynod at 21bhp at chisel speed fuel consumptions good and sits nicely at 70-75 with very little vibration and plenty of torque. interested w...
- Mon Apr 09, 2012 8:41 pm
- Forum: Lambretta Tech
- Topic: ts1 225 to 240
- Replies: 13
- Views: 6578
Re: ts1 225 to 240
Recently done mine to a 240 (238) for this season, spec is:
71mm touring tune by chisel speed running no gaskets
60-115 mb crank
30mm mikuni
Taffy pipe
m tech
Dynod at 21bhp at chisel speed
fuel consumptions good and sits nicely at 70-75 with very little vibration and plenty of torque.
71mm touring tune by chisel speed running no gaskets
60-115 mb crank
30mm mikuni
Taffy pipe
m tech
Dynod at 21bhp at chisel speed
fuel consumptions good and sits nicely at 70-75 with very little vibration and plenty of torque.