Scooterotica

jonnyb

Modern oils a lot better, 3% or 4% if it means you worry less

jonnyb

Loose baffles?

jonnyb

Just for reference I had the Mugello manifold machined down for Â£20 at a local engineering firm, chap turned it around in a day for me. I had to lengthen and tweak the fuel tap rod to go behind the carb but I've now got a breath sweet filter that is not crushed by the side panel and I'm much happie...

jonnyb

I've started texting my neighbours just before 7am to wake them up politely before I start the fecker up

jonnyb

Might be worth buying a wider small end bearing assuming your crank is shimmed, Cambridge lambretta have them in stock I think

jonnyb

Thanks for all the advice guys :-) I did think about having my mugello manifold machined down but I don't want to be without the use of the lammy for a few days, my mate who does little jobs like that for me is great but can't be rushed! I'm going to give the mb or Readspeed manifold a try I think.....

jonnyb

Hello, I can only help by telling you what I'm using with the same carb and V4 mugello 200 cylinder, I've used an Ancilloti exhaust but now have a Gori and forget my earlier settings, shouldn't be two far off though :-) I think your slide may be a bit lean to compensate for an over rich atomiser and...

jonnyb

Any suggestions as to the shortest reach PHBH Carb manifold for a piston port engine? I've used the Mugello manifold on my last two engines and am looking for something as short as possible to give me more carb/pannel clearence for the filter, the MB downdraft one is an obvious choice and looks to g...

jonnyb

Summer?

jonnyb

I'll consider myself lucky.....

Are you expecting to bolt a on a new kit and its inlet, exhaust and transfers to match perfectly with your manifold, exhaust and engine case?

Good luck to you

I'll add that the kits you mention above are both great IMHO

Search found 42 matches

Re: Correct oil mix percentage 3% ?

Re: Should my Lammy sound like this....

Re: Shortest PHBH Carb Manifold?

Re: very loud noise from engine

Re: Mugello 186 piston shims

Re: Shortest PHBH Carb Manifold?

Re: muggy carb help

Shortest PHBH Carb Manifold?

Re: MB Clubman - News

Re: MB Race Tour cylinder kit opinions

Login • Register

Advertising