Search found 27 matches

by Rude De
Tue Oct 09, 2012 1:07 am
Forum: Lambretta Tech
Topic: Effects of ignition timing on power characteristics.....
Replies: 8
Views: 4502

Re: Effects of ignition timing on power characteristics.....

A-B Honda Factory race Kits. Have the ignitions mapped out to the pipes. These Ignition Retarders are really an Ounce of Prevention too Costly Pounds Of Cure "holed piston and seizures". Programmable ignitions or preprogrammed ignition curves to the pipes power curve are the real deal for ...
by Rude De
Tue Dec 14, 2010 7:30 am
Forum: Lambretta Tech
Topic: Hydraulic rear brake
Replies: 16
Views: 2844

Re: Hydraulic rear brake

That is so cyborg mutant looking
Love it
by Rude De
Mon Jul 19, 2010 7:34 am
Forum: Lambretta Tech
Topic: RB22 After Germany
Replies: 24
Views: 7524

Re: RB22 After Germany

Your second picture has a shinny polished spot, on the edge crown going down the side and over the side towards the skirt side where the ring groves are, with no carbon build up. It should match up to a place on the head where it was hitting the head the squish and the edge of the combustion chamber...
by Rude De
Mon Jun 28, 2010 7:09 am
Forum: Lambretta Tech
Topic: Nasty Hub Failure
Replies: 10
Views: 3837

Re: Nasty Hub Failure

Damn

Image
by Rude De
Mon Apr 26, 2010 4:25 am
Forum: Lambretta Tech
Topic: Extended exhaust manifold nuts
Replies: 9
Views: 2362

Re: Extended exhaust manifold nuts

I use Small frame Vespa 7mm coupling nut that holds on the cylinder shroud from the head
by Rude De
Wed Apr 07, 2010 8:13 am
Forum: Lambretta Tech
Topic: TV 200 question ?
Replies: 22
Views: 7231

Re: TV 200 question ?

http://lh6.ggpht.com/_7aX-01kOnCs/S7wty-2e83I/AAAAAAAAFLY/0Gnl7FIHp_s/s400/IMG_1698.JPG[img] http://lh4.ggpht.com/_7aX-01kOnCs/S7wt0mb1UxI/AAAAAAAAFLc/TvXNWeC9xiM/s400/IMG_1697.JPG[/img] http://picasaweb.google.com/lh/photo/eMeiRjmh9P-ECW5YqeHTRw?feat=directlink http://picasaweb.google.com/lh/photo...
by Rude De
Fri Apr 02, 2010 7:32 pm
Forum: Lambretta Tech
Topic: TS1 reedvalve choices
Replies: 8
Views: 2723

Re: TS1 reedvalve choices

http://www.duncanracing.com/mm5/merchan ... de=PRV-350
You have to by them as a pair. And cut the built in spacers off :ninja:
by Rude De
Sun Sep 27, 2009 5:17 pm
Forum: Lambretta Tech
Topic: Trick for recovering speedo cable nut?
Replies: 14
Views: 4168

Re: Trick for recovering speedo cable nut?

easy peasy pull the housing out of the fork with the inner removed put the housing back in the fork _the wrong way pushing it in through the lower hole under the mud guard and as the housing emerges through the top of the fork the nut is caught on the end and is being pushed out by the housing and t...

cron