Search found 143 matches
- Sun Apr 24, 2016 7:38 pm
- Forum: Vespa Tech
- Topic: Malossi 221 sport set up
- Replies: 0
- Views: 1391
Malossi 221 sport set up
Hello, I'm long stroking a Malossi 210 sport, details of motor below - need a rough ball park as to what to jet it and possibly what to time it to. Malossi 210 sport Mmw low comp head Worb5 flowed long stroke crank Mrb reedvalve with bgm block /reeds Phbh 30 Not decided on filter as of yet Sip perfo...
- Wed Dec 30, 2015 12:29 am
- Forum: Vespa Tech
- Topic: 24 tooth clutch
- Replies: 1
- Views: 2214
24 tooth clutch
anyone ran one in a malossi 210
will it pull?
will it pull?
- Wed Dec 30, 2015 12:18 am
- Forum: Vespa Tech
- Topic: reed valve kit with a flowed crank
- Replies: 4
- Views: 2846
reed valve kit with a flowed crank
iv been looking at reedvalving my malossi 210 and going to longstroke it but don't want to trash the sealing pad with a reedvalve, so i was told on here to try and find an old malossi reedvalve or one that matches the normal inlet, then put a long stroke flowed crank in, so iv found two possibilitie...
- Wed Dec 30, 2015 12:09 am
- Forum: Vespa Tech
- Topic: sip wide wheels again
- Replies: 3
- Views: 2306
Re: sip wide wheels again
thanks for that,
I thought is it me or is it im just imagining it,
steering at high speed is twitchy as you described
and yes going into bends also seems to be more twitchy due to the taller tyre,
when i had the 130/70/10 on it stuck quite well into the corners and roundabouts,
cheers
I thought is it me or is it im just imagining it,
steering at high speed is twitchy as you described
and yes going into bends also seems to be more twitchy due to the taller tyre,
when i had the 130/70/10 on it stuck quite well into the corners and roundabouts,
cheers
- Tue Dec 29, 2015 10:07 pm
- Forum: Vespa Tech
- Topic: sip wide wheels again
- Replies: 3
- Views: 2306
sip wide wheels again
anyone else on here ran the two different tyre sizes - 130/70/10 - equal to a standard just wider and the 120/90/10 - the taller bigger tyre? i had to change the gearing for the taller one, but has anyone ridden a scoot with the taller bigger tyre? iv ran both and for some reason I think the taller ...
- Tue Oct 13, 2015 9:00 am
- Forum: Vespa Tech
- Topic: Sip 16 rivet clutch or ferodo welded 8 rivet?
- Replies: 0
- Views: 1282
Sip 16 rivet clutch or ferodo welded 8 rivet?
Hello, I would have purchased a sip 16 rivet cosa clutch basket banded but no one has one in stock not even sip, so im thinking for my malossi 210, which would be better a sip 16 rivet cosa cluth basket - no band welded on, - how likely are the webs going to open under load? https://www.beedspeed.co...
- Tue Sep 15, 2015 10:29 pm
- Forum: Vespa Tech
- Topic: Vespa PX 221 help
- Replies: 67
- Views: 23760
Re: Vespa PX 221 help
im now in the process of long stroking my old 210 malossi to get a more torquey motor, just wondering what pipes you are both running? also as for fuel economy as someone has mentioned before, your not going to get any better than 50-65 miles out of a full tank, I plan my journeys and make sure I al...
- Tue Sep 15, 2015 9:50 pm
- Forum: Dyno Chat
- Topic: polini 210 and 220 dyno graphs
- Replies: 4
- Views: 8645
- Sun Sep 13, 2015 9:57 pm
- Forum: Vespa Tech
- Topic: Wide Rear Tyre Conversions... R they any Good?
- Replies: 18
- Views: 10574
Re: Wide Rear Tyre Conversions... R they any Good?
On mine all I have to do is remove exhaust and undo rear shock, gave enough clearance to remove 130-70 and 120/90 I was also looking at an lml auto the other day and I'm sure the panels look wider than Vespa, going to have to borrow one and see if they are, if so I could then shift the engine over a...
- Sun Sep 13, 2015 9:52 pm
- Forum: Vespa Tech
- Topic: not happy with my old malossi 210
- Replies: 21
- Views: 6825
Re: not happy with my old malossi 210
So what are the ideal port timings then?
And therefore what size packers base and head roughly equate them?
And therefore what size packers base and head roughly equate them?