cool thats good , not set the speedo up but the mph is reading pretty accurate when I rode in to the village past the digital speed sign , bang on what it said. So hopefully it is f , coz if it was Centigrade it would be scorchio by the time I pulled up .
thanks again everyone.
Rich
Search found 37 matches
- Tue Mar 11, 2014 12:49 am
- Forum: Lambretta Tech
- Topic: Lambretta sip speedo
- Replies: 11
- Views: 5084
- Mon Mar 10, 2014 9:51 pm
- Forum: Lambretta Tech
- Topic: Lambretta sip speedo
- Replies: 11
- Views: 5084
Re: Lambretta sip speedo
Cheers guys just what I wanted to here . I know the plug is right after setting it up this morning, so he can ride it now. Myself I think the exhaust temp gauges are better for scooters but so long as we have a start point and go from there.
Thanks everyone .
Rich
Thanks everyone .
Rich
- Mon Mar 10, 2014 4:05 pm
- Forum: Lambretta Tech
- Topic: Lambretta sip speedo
- Replies: 11
- Views: 5084
Re: Lambretta sip speedo
Better read up on them then ? Dont have a clue
- Mon Mar 10, 2014 3:56 pm
- Forum: Lambretta Tech
- Topic: Lambretta sip speedo
- Replies: 11
- Views: 5084
Re: Lambretta sip speedo
Just fitted to a fin on the head , far side where the exit is jon
- Mon Mar 10, 2014 1:53 pm
- Forum: Lambretta Tech
- Topic: Lambretta sip speedo
- Replies: 11
- Views: 5084
Lambretta sip speedo
Hi all setting up a Mugello 186 with a 28 dellorto phbh carb , the temp gauge can run at 170-190 on 18 mile journey sitting between 5,500 and 6,000 revs. Plug looks a lovely brown colour when I do the plug chop at around 6,000 revs , the owner is concerned it is running hot. Never used a temp gauge ...
- Tue Jan 07, 2014 6:43 pm
- Forum: Lambretta Tech
- Topic: fuel tap ?
- Replies: 5
- Views: 2276
Re: fuel tap ?
just had a vacuum fuel inline pump valve arrive today , looks on the small side but will check it out and let you all know if it works ok . So long as the inlet-outlet bore is large enough should work with a vacuum hose to the inlet manifold .
thanks all
thanks all
- Tue Jan 07, 2014 6:40 pm
- Forum: Tech FAQ
- Topic: Agusto 6000
- Replies: 14
- Views: 8295
Re: Agusto 6000
Hi Jonno sorry didnt spot your reply , the agusto will allow the arrow to line up with the 18degree mark on the mag housing when you kick the engine over, then as you rev it up the arrow on the flywheel will drop backwards towards the other marks you have made on the housing towards the TDC. it shou...
- Tue Jan 07, 2014 6:12 pm
- Forum: Vespa Tech
- Topic: Vespa dim lights
- Replies: 1
- Views: 1744
Vespa dim lights
Hi all been asked to have a look at Vespa TS 125 with a PX125 motor fitted. The loom was made to fit the 1975 scoot but also the 12v PX engine . Just recently it has started blowing bulbs , and also the headlamp is very dim. The loom/engine has been in for a couple of years, he has fitted a new regu...
- Thu Nov 28, 2013 5:14 pm
- Forum: Tech FAQ
- Topic: Agusto 6000
- Replies: 14
- Views: 8295
Re: Agusto 6000
Jon are you serious ? 25 degrees
- Thu Nov 28, 2013 3:37 pm
- Forum: Tech FAQ
- Topic: Agusto 6000
- Replies: 14
- Views: 8295
Re: Agusto 6000
Fitted a few Agusto's to ,Lammie's . Never had one done on a dyno , Main supplier for the units in the uk is Chalkie at replay scooters and I've only ever fitted them using a timing light to make sure the timing retards from 18 degrees BTC (before top dead centre) down to 15/16 btc. used to set them...