Scooterotica

jaelee

What he said. Is it revving out ok in gears 1,2 and 3? yes it revs out fine in 1,2,3 What could I change to improve things? I'm not trying to hijack this thread but any advice would be great. no problems Pete. more info is always good. one more question. How do i stretch a chain? I want to throw a ...

jaelee

try running the carb open with no side pannel on just to make sure your getting enough air in also i use a 30mm delly carb i don't think that's the problem, here's a pic of the carb: http://farm9.staticflickr.com/8015/7446294594_5d0cd87f29_c.jpg i forgot to mention that I'm running a mec race crank...

jaelee

yes it is an electronic, bgm 120 watt stator with an elemec 1.9 kg flywheel. I got the carb from an ebay store, I can't remember which one tho. As far as set up goes, it was easy, much easier than the dellorto i had on a small frame.

jaelee

here's the set up: 30mm oko, 138 main, 42 pilot, jjk needle on the middle clip scootrs exhaust italian li 150 gearbox 15x46 sprockets 19 btdc timing here's the problem: it just feels like it's being held back on the top end. It seems to hit a wall at 7000 rpm. I figured that it was the pipe that hol...

jaelee

i'm running one on a smallframe and the magnets on there are cracked too

jaelee

i'm running a new af rayspeed lightened flywheel...and i actually like the way it's running it's just that the timing was off.

jaelee

yea i should have done my research and asked around. oh well...i have everything adjusted so that it;s running well.

jaelee

how do i do that? the key way on the flywheel and crank are lined up and the flywheel sits on the crank nicely or do you mean the key way on the flywheel is not cut in the correct place?

jaelee

just a quick question...has anyone ever had to grind out the slots on a bgm stator to get the timing to 17-19 degrees? I'm using a new af lightened flywheel ( 1.4 kg one ) and with the stator all the way counter clockwise i got to 15 degrees.

jaelee

all fixed

thanks everyone

Search found 19 matches

Re: imola being held back?

Re: imola being held back?

Re: imola being held back?

imola being held back?

Re: Cracked magnets on a Varitronic

Re: your experiences with a bgm stator

Re: your experiences with a bgm stator

Re: your experiences with a bgm stator

your experiences with a bgm stator

Re: steering issues...

Login • Register

Advertising