Search found 1129 matches

by ducksta
Tue Feb 18, 2020 8:32 pm
Forum: Vespa Tech
Topic: No lights?
Replies: 1
Views: 2250

No lights?

Just finished building a Vespa px streetracer. Fully blasted painted and built with everything new, ie new switches loom regulator etc, the engine came out of another scoot so happy everything works ie stator etc, Scoot starts 2 nd kick but I have no other power, nothing. horn,lights,indicators fuel...
by ducksta
Sun Feb 16, 2020 11:38 am
Forum: Vespa Tech
Topic: RZ Mk2 RH Exhaust fitment
Replies: 2
Views: 3247

Re: RZ Mk2 RH Exhaust fitment

I ran both on same set up revolver gave better pulling power low down but 1bhp lower then the rz on the dyno
by ducksta
Sun Jan 05, 2020 7:56 pm
Forum: Vespa Tech
Topic: How to change PX back wheel.
Replies: 4
Views: 3728

Re: How to change PX back wheel.

Put a small block of wood under the right hand side stand leg, undo the rear hub big nut off split pin etc then lean it over to the right and it will all come off easy with out fouling the frame then take wheel off fit new and reverse process.
by ducksta
Sun Dec 29, 2019 9:25 pm
Forum: Vespa Tech
Topic: Radiator size
Replies: 4
Views: 3979

Re: Radiator size

Cheers food for thought, also if not running a battery how do I get a pump to work
by ducksta
Tue Dec 24, 2019 9:40 pm
Forum: Vespa Tech
Topic: Radiator size
Replies: 4
Views: 3979

Radiator size

What size radiator would be needed for a tuned px 190cc 24 bhp
by ducksta
Wed Nov 06, 2019 11:16 pm
Forum: Lambretta Tech
Topic: Lambretta crank induction with Malossi MHR 221
Replies: 34
Views: 19412

Re: Lambretta crank induction with Malossi MHR 221

Nothing happening on the build ?
by ducksta
Mon Dec 03, 2018 8:28 am
Forum: Vespa Tech
Topic: Help! SIP Road 2 Fitting.
Replies: 9
Views: 6490

Re: Help! SIP Road 2 Fitting.

I took the cage off offered it all in place (engine out of scoot and my m8 spot welded the nut in place works a treat.
by ducksta
Sat Dec 01, 2018 7:47 pm
Forum: Vespa Tech
Topic: Regulator
Replies: 0
Views: 4596

Regulator

Can I use a 5 pin regulator instead of a 3 pin and where would the wires go.
by ducksta
Thu Nov 29, 2018 11:17 pm
Forum: Standard Scoots & Restorations
Topic: PX frame prep, blast or dip?
Replies: 2
Views: 3863

Re: PX frame prep, blast or dip?

I have them blasted then use airline to clean out sprayed then wax oiled in struts
by ducksta
Thu Nov 29, 2018 11:09 pm
Forum: Vespa Tech
Topic: Quick action throttle
Replies: 1
Views: 2770

Quick action throttle

Wanting to fit a quick action throttle on my px disc headset.
Which one will fit as there’s loads to choose from
Any ideas appreciated

cron