Search found 298 matches

by davidblythe
Sun Jun 05, 2011 7:36 pm
Forum: Lambretta Tech
Topic: TS1 Ron Moss Ts1
Replies: 17
Views: 7295

Re: TS1 Ron Moss Ts1

do a straight swap with a LI 125 box to give a ratio of 5.00 on the same sprockets

friend runs the same set up and it does 80mph gps speed
by davidblythe
Sun Jun 05, 2011 3:18 pm
Forum: Lambretta Tech
Topic: Ever seen this before
Replies: 5
Views: 2418

Ever seen this before

Been in a couple of years, thought I had holed the piston on the A3M last Monday as bike locked on initial investigation magnet had come loose on the flywheel with what looked like a twisted crank further delving showed the below which probably caused the magnet to come loose 350 rod on sil webs, no...
by davidblythe
Wed May 12, 2010 8:21 pm
Forum: Lambretta Tech
Topic: Soppy idea or worth a punt
Replies: 27
Views: 9508

Re: Soppy idea or worth a punt

tzr.steve wrote:If that is lockwire on cylinderhead nuts, I would not be tempted to try myself.
Hi Steve

yes it is lockwire, can you explain a little more, appreciate your input
by davidblythe
Wed May 12, 2010 7:10 pm
Forum: Lambretta Tech
Topic: Soppy idea or worth a punt
Replies: 27
Views: 9508

Soppy idea or worth a punt

Work pressure finally easing up


anyway constructive or otherwise comments welcome



Image
by davidblythe
Fri Mar 12, 2010 9:53 pm
Forum: Lambretta Tech
Topic: dot 5 ?
Replies: 8
Views: 2377

Re: dot 5 ?

dot 5.1 is compatible with dot 4

dot 5 is silicone based, really need to clean out the system if changing over to dot 5, easier said than done
by davidblythe
Tue Feb 09, 2010 5:47 pm
Forum: Lambretta Tech
Topic: Serious Problem With Rear Hub
Replies: 8
Views: 4675

Re: Serious Problem With Rear Hub

there is a similiar issue with DRZ400's with the front sprocket always coming loose, very similiar setup to a Lammy with splined layshaft and sprocket, it uses a locking plate to retain the nut once tightened problem is caused by slight wear on the interface between the splines of the sprocket and l...
by davidblythe
Sun Jan 31, 2010 5:55 pm
Forum: Lambretta Tech
Topic: £5 Prize to guess top speed on an RT 250
Replies: 51
Views: 12975

Re: £5 Prize to guess top speed on an RT 250

Chris CSPE wrote:Give my 5 pounds to help the heroes
Was that you i met at M.B the other day?

No never been to MB,s shop, was at Doncaster for the AGM last week

Darrell is often there thou
by davidblythe
Sun Jan 31, 2010 5:24 pm
Forum: Lambretta Tech
Topic: £5 Prize to guess top speed on an RT 250
Replies: 51
Views: 12975

Re: £5 Prize to guess top speed on an RT 250

yam-lam wrote:
eibargum wrote:Cant be arsed to check :oops: , who won.


i think chris cspe with 81mph

Must admit didnt look myself, if Chris cspe pm's me his paypal address, will tfr a fiver


good afternoon out, messing around
by davidblythe
Sun Jan 31, 2010 4:29 pm
Forum: Lambretta Tech
Topic: £5 Prize to guess top speed on an RT 250
Replies: 51
Views: 12975

Re: £5 Prize to guess top speed on an RT 250

results are in the mad mile is slightly less than 1 Km end to end Rapido 250 32mm VHSA taffy 68mph Race Rapido 225 30mm phbh NK, AF Flywheel 75.8mph TS1 225 35mm TMX, Ancilliotti Clubman Freshly rebuilt 73.9mph Stage 4 200 30mm phbh Clubman 64.7mph RT220 30mm phbh VW Reverse clubman 67mph TS1 225 30...
by davidblythe
Sun Jan 31, 2010 12:02 pm
Forum: Lambretta Tech
Topic: £5 Prize to guess top speed on an RT 250
Replies: 51
Views: 12975

Re: £5 Prize to guess top speed on an RT 250

yam-lam wrote:83.5 gps road speed ......... what clubman are you using

some one off made between B Race and MB, with a few hours on the dyno

maybe IAN can say more