Scooterotica

Wee Mark

Hi Simon In defence of the in-line filter i,ve had one(MB Supplied Annodised with windows) on for 5 years and had no issues & its been well thrashed to Kelso and back and more than a few middle distance rallies and when you clean the filter out and see what these things strain out :o you would,n...

Wee Mark

.....or if you gotta use the Circlip system fit it and put a tiny blob of loctite on circlip to stop it pinging off, just make sure your linkage still moves!!!

Wee Mark

Hello Grumpy, it shimmed at the smallest clearance acceptable 0.07mm which i was pleased about as it will mean that it has plenty of wear margin and i will be running in the whole engine as its brand new componants all the way through. The box spins in all gears with a little resistance.....oh by th...

Wee Mark

SORRY....for late reply!!!.....i managed to get it shimmed up with am MB undersized shim 1.70 with no use for the hub end shims (of course as said these would have opposite effect).... for information both Cam Lam & Beedspeed have even thinner shims

Wee Mark

Evening gents, i,m having a evil time trying to Shim my gear box on my TS1 build......set up is Brand new Indian GP gearbox with MB Racetour Layshaft, new rear hub bearing(as well as all other bearings)......its all in a Servetta case with an Italian LI end plate(not got the original)......i,m down ...

Wee Mark

Simon Brace's B-Race STEALTH, no need for any cutting, the most solid expansion i have ever felt, massive torque!!!...ideal for Series 2 Bodywork/weight.......

Wee Mark

Good luck to the maufacturer and those who backed it, but even the Mighty(& very Sucessfull) Tino Satchi had a go at doing this as well as others and never managed to get it right!!!....

Wee Mark

Fair enough Soosh but the Rapido HAS an Iron lining and is just as cheap to repair(rebore) but i agree Iron,s still cheaper if he do'sent have to buy the Rapido kit in the first place

Wee Mark

Sorry guys,read this post wrong(i,m still routeing cables)& then went off the radar for a while. Thanks a lot for post & pics!!!...this will help me in the near future.....

Wee Mark

Very interesting gentlemen, i have the same problem and have chosen to enter frame with cables at the side on steering tube/frame joining point but because of TS1 kit i have exited above engine mount( avoiding carb),its a very difficult choice and must be made on each projects needs...pictures do he...

Search found 17 matches

Re: Issue with stainless tank ?

Re: No Drive after rebuild...

Re: Doing the shimmy!!!

Re: Doing the shimmy!!!

Doing the shimmy!!!

Re: Series 2 Exhaust Choice

Re: 5-speed-box

Re: stage 4 or classic rapido

Re: wheres the best place to run a loom through the frame t

Re: wheres the best place to run a loom through the frame t

Login • Register

Advertising