Search found 38 matches

by JOHNNY
Sat Feb 25, 2012 3:38 pm
Forum: Lambretta Tech
Topic: Leaky Tap
Replies: 2
Views: 567

Leaky Tap

There is different types of ptfe tape , for water , gas , oxygen , gun wash / thinners so I'm guessing you have used the plumbers stuff ? as you know doubt have found out it won't last 5 mins . Maybe try the ones made for paint pumps , if you want I could grab some from work and send it to you , and...
by JOHNNY
Thu Jun 30, 2011 7:33 pm
Forum: Lambretta Tech
Topic: Mikuni TM 24 bogging down with breathe sweet filter
Replies: 19
Views: 4746

Re: Mikuni TM 24 bogging down with breathe sweet filter

You guys are lucky I can't even get my one on , the blurb says that it fits under panels , well mine won't . If I fit it then put the panel on it squashs the filter and rubber bit then deforms the panel it's that tight . For £45 it's a rip off cheap foam filter and even cheaper blue 90 degree rubbe...
by JOHNNY
Thu Jun 16, 2011 10:22 pm
Forum: Vespa Tech
Topic: X2 Smallframe Crankcase bolts needed........HELP Please!
Replies: 1
Views: 507

Re: X2 Smallframe Crankcase bolts needed........HELP Please!

Think I might have a set will look tomorrow for you
by JOHNNY
Mon Jun 06, 2011 8:14 pm
Forum: Lambretta Tech
Topic: What 2 Stroke Oil are People Using on their RB Kits?
Replies: 17
Views: 3751

Re: What 2 Stroke Oil are People Using on their RB Kits?

RB270
64 stroke crank
Bultaco 73 mm piston
Tmx35
330 main
56 needle middle clip
25 pilot
Mtec box
Motul 800 4%
by JOHNNY
Fri Jun 03, 2011 7:42 pm
Forum: Lambretta Tech
Topic: stator breakdown
Replies: 14
Views: 2972

Re: stator breakdown

Finally got it running at long last ! Just afew final tweaks tomorrow on the dyno and all shall be well , thanks to everybody who's posted suggestions think we tried them all and more cheers guys
by JOHNNY
Wed Jun 01, 2011 9:02 pm
Forum: Lambretta Tech
Topic: stator breakdown
Replies: 14
Views: 2972

Re: stator breakdown

Ok
by JOHNNY
Wed Jun 01, 2011 8:27 pm
Forum: Lambretta Tech
Topic: stator breakdown
Replies: 14
Views: 2972

Re: stator breakdown

Thanks for the help and having another head to bounce the problem off Sean , the problems still there though , Wayne spoken to dan about the jetting and it's abit out main and slide are ok but needle , clip position , pilot and mixture are incorrect so that's going to be the next port of call , was ...
by JOHNNY
Tue May 31, 2011 9:50 am
Forum: Lambretta Tech
Topic: stator breakdown
Replies: 14
Views: 2972

Re: stator breakdown

Jetting etc is spot on reeds ok but will double check it's very strange I can tell you
by JOHNNY
Tue May 31, 2011 12:05 am
Forum: Lambretta Tech
Topic: stator breakdown
Replies: 14
Views: 2972

Re: stator breakdown

Just read on the bgm site that the bgm stator do's not like / work with the Af flywheel is this true or just a marketing ploy ? Had a look at some sets , flywheel and bgm stators cdi's and none of them are paired with Af flywheels . Might just bite the bullet and get a complete set up , just hope it...
by JOHNNY
Mon May 30, 2011 9:56 pm
Forum: Lambretta Tech
Topic: stator breakdown
Replies: 14
Views: 2972

Re: stator breakdown

Crank runs true bearings ok , already checked that, the flywheel had picked up on the original bgm but didnt on the Af ones which still had the same problem