Scooterotica

Stringy

What size is the tailpipe on the new MB Clubman?

Stringy

Which type of gauge would people recommend for a basic indication of an engines running temperature?

Cylinder head temperature or exhaust gas temperature?

Thanks

Stringy

This is a good one and you can download a free trial:

http://www.conelayout.com/

Stringy

There is an original drawing of a standard exhaust on the Tutto Lambretta website:

http://www.tuttolambretta.it/galleria.a ... =214&pag=1

Hope this helps.

Stringy

You can also get a 3mm collet for the Snap On/Bluepoint right angle grinder.

The part number is: AT1070RA19 and they are Â£8.40+vat.

I emailed Snap On and asked the question as most of my Burrs/Stones have a 3mm shank.

Does this tool have any kind of speed control?

Stringy

Taken from A.Bell's book: Ratio of Fuel:Air Starting 1:1-3 Idling 1:8-10 Low speed running 1:10-13 Light load ordinary running 1:14-16 Heavy load running 1:12-14 In the text he states that the required mixture is around 1:12 or 1:13 which is just right for WOT.

Stringy

It took a while to find, no one had replied when i started searching!

Stringy

This was posted on the LCGB forum:

http://forums.lcgb.co.uk/phpBB2/viewtopic.php?t=269

Stringy

Jamesp from the LCGB forum has quite a bit of experience using these carbs, he put together the following guide to converting and using them on a lambretta: http://members.value.com.au/jamesp/tm28instructions.doc I have a TM28 i am planning to use in the near future, James suggested the following je...

Stringy

Stag Wellseal is good.

Search found 13 matches

Re: bgm/mb clubman exhaust

Re: Advice on using choke to stop heat seize on long ride

Re: pattern development software

Re: Standard stainless exhaust

Re: Porting tools....???

Re: air fuel ratio....again

Re: Headset top threads stripped.

Re: Headset top threads stripped.

Re: Mikuni TM 28mm Carbs off TZR..??

Re: Clinder head gasket sealent

Login • Register

Advertising