Everywhere ive tried seems to be out of stock, can anyone on here help out at all?
cheers
Search found 71 matches
- Mon Oct 28, 2013 2:29 pm
- Forum: Lambretta Tech
- Topic: IMOLA PISTON needed!
- Replies: 8
- Views: 2878
- Tue Sep 25, 2012 12:41 pm
- Forum: Lambretta Tech
- Topic: piston bottoming out on casings... imola 60mm
- Replies: 2
- Views: 1817
Re: piston bottoming out on casings... imola 60mm
cheers, 1mm trimmed off, problem solved.
- Sun Sep 23, 2012 1:01 am
- Forum: Lambretta Tech
- Topic: piston bottoming out on casings... imola 60mm
- Replies: 2
- Views: 1817
piston bottoming out on casings... imola 60mm
Ive just rebuilt my IMOLA engine with the standard Imola piston except this time on a 60mm instead of the old 58mm crank. with a 107mm rod as before. I carefully rotated the crank/flywheel to make sure the top end was all ok and and the piston seems to make very very slight contact at bdc. Possibly ...
- Wed Sep 19, 2012 10:48 pm
- Forum: Lambretta Tech
- Topic: Imola Piston!?
- Replies: 4
- Views: 2632
Re: Imola Piston!?
cheers Bofs, I already tried Mike, Camlam, MB etc. Ill give it another week or so as they said they were expecting delivery quite soon.
I was just hoping to get the scoot fixed this weekend.
Thanks
I was just hoping to get the scoot fixed this weekend.
Thanks
- Wed Sep 19, 2012 5:46 pm
- Forum: Lambretta Tech
- Topic: Imola Piston!?
- Replies: 4
- Views: 2632
Imola Piston!?
Anyone know of any stockists at present? i cant get hold of one.
I have the later kit, my old piston had IMOLA in big letters up the inside of it.
Any help on this apreciated.
best
I have the later kit, my old piston had IMOLA in big letters up the inside of it.
Any help on this apreciated.
best
- Sun Sep 02, 2012 10:10 am
- Forum: Lambretta Tech
- Topic: Imola sprocket advice for touring... 46-15?
- Replies: 3
- Views: 2609
Imola sprocket advice for touring... 46-15?
Ive almost finshed building my engine, im after advice on which sprockets would give the best result. Im not interested in top speed as I mainly use it around London and for touring (luggage / hills etc.), it currently has a 16 front x 46 rear arrangement. Would swapping the front sprocket (and chai...
- Fri Jun 01, 2012 2:07 pm
- Forum: Lambretta Tech
- Topic: IMOLA exhaust opitons?
- Replies: 6
- Views: 2682
Re: IMOLA exhaust opitons?
In all honesty when i first put it together i only ever remember it being a very 'slight' improvement over an SR barrel i had on before it, which i toured to Spain and back. However the Imola was a lot more reliable. Slightly dissapointing to hear im sure but thats my experience with it, i never int...
- Sat May 26, 2012 4:24 pm
- Forum: Lambretta Tech
- Topic: IMOLA chipped port... piston and head not so smooth anymore!
- Replies: 4
- Views: 2136
Re: IMOLA chipped port... piston and head not so smooth anym
Being posted to MB on Monday for a once over, tidy up + bit of a fiddle then returned with the new crank, piston and bits. Ill assemble it, then its off to either Diablo or JB for a dyno to make sure its all set up correctly. Thanks for the advice guys really apreciated and ill post an update when i...
- Sat May 26, 2012 11:39 am
- Forum: Lambretta Tech
- Topic: IMOLA exhaust opitons?
- Replies: 6
- Views: 2682
Re: IMOLA exhaust opitons?
haha, its just a joke mate (as is the quality of the exhaust)... Im definately NOT impressed at all with the build quality!!
Ill certainly try to get it swapped but i cant imagine anyone will take an exhaust back after 9 months, ill try though.
Ill certainly try to get it swapped but i cant imagine anyone will take an exhaust back after 9 months, ill try though.
- Fri May 25, 2012 9:16 pm
- Forum: Lambretta Tech
- Topic: IMOLA chipped port... piston and head not so smooth anymore!
- Replies: 4
- Views: 2136
IMOLA chipped port... piston and head not so smooth anymore!
Here comes the sun...BANG! there goes the scoot haha... pics below of my piston and chipped port: 1. Can i use the barrel with this chip in it? its a little less severe than it appears in the pic. 2. will the head be ok, do i replace it or get it re-profiled? , it has a few dents in it!!. http://www...