Search found 50 matches
- Wed Aug 05, 2009 6:50 pm
- Forum: Lambretta Tech
- Topic: Best piston for Ts1 225
- Replies: 23
- Views: 7805
Re: Best piston for Ts1 225
Canny price on american ebay!!! Think I may of made a mistake with the rd400 rod! I thought the little end was the same size but on checking a spare little end bearing the rod eye is too large !! I thought it was the same as a standard lambretta??? thew panic over i had tried a primmy little end thi...
- Tue Aug 04, 2009 7:47 pm
- Forum: Lambretta Tech
- Topic: Best piston for Ts1 225
- Replies: 23
- Views: 7805
Re: Best piston for Ts1 225
Im already comited to the rd400 rood as its now fitted to the crank I will be using so got to stick with a piston tha will go with a long rod conversion but thanks for the help JIMS
- Tue Aug 04, 2009 7:45 pm
- Forum: Lambretta Tech
- Topic: Best piston for Ts1 225
- Replies: 23
- Views: 7805
Re: Best piston for Ts1 225
Cheers Diablo and Sion! The piston for both the dt250 and the yz are the same but I dont know if the pistons changed spec over the years of manufacture so will have to find out which year is needed. Im thinking that with an rd400 rod and that piston I may need to look at port timings and packing pla...
- Tue Aug 04, 2009 3:16 pm
- Forum: Lambretta Tech
- Topic: Best piston for Ts1 225
- Replies: 23
- Views: 7805
Re: Best piston for Ts1 225
So !! Does Anyone know where the wiseco piston comes from ! What bike????
- Tue Aug 04, 2009 12:34 pm
- Forum: Lambretta Tech
- Topic: Best piston for Ts1 225
- Replies: 23
- Views: 7805
Re: Best piston for Ts1 225
So if im using a wiseco piston which bike is it from as it seems thats probs the way im going to go!!
Thanks for the help so far!!!!
Thanks for the help so far!!!!
- Tue Aug 04, 2009 10:35 am
- Forum: Lambretta Tech
- Topic: Best piston for Ts1 225
- Replies: 23
- Views: 7805
Best piston for Ts1 225
I am going to fit an indian crank with rd400 rod over winter and am preparing to get the barrel relined and a new piston. Whats everyones opinion on the best piston to fit regarding performance / balance and reliability! I dont want to move ring pegs or anything like that! I just want a striaght fit...
- Sat Aug 01, 2009 12:02 pm
- Forum: Lambretta Tech
- Topic: panel strengthening
- Replies: 18
- Views: 5259
Re: panel strengthening
Good point about the welding and sending vibration somewhere else but instead of tape why dont you use a good bonding glue like sticks like s**t or something????
My camper was held together with the stuff!!
My camper was held together with the stuff!!
- Tue Jun 30, 2009 8:12 pm
- Forum: Lambretta Tech
- Topic: Vapor trail tech
- Replies: 9
- Views: 3306
Re: Vapor trail tech
My panic is over but a couple of things to watch out for! 1) when I posted this the figures where in fahrenheit and looking at your posts suggests you are all using celcius so if anyone else is worried about high figures check how your vapor is set. 2) I used the ring around the plug method only to ...
- Tue Jun 30, 2009 8:31 am
- Forum: Lambretta Tech
- Topic: Vapor trail tech
- Replies: 9
- Views: 3306
Re: Vapor trail tech
Well I have been out on it and its running completely different figures to those of you that posted. It currently runs at 220 f which seems a little high considering your all getting around 177 f The scoot is running sweet and has had no problems with many miles built this way so buying a vapor has ...
- Thu Jun 25, 2009 12:40 pm
- Forum: Lambretta Tech
- Topic: Vapor trail tech
- Replies: 9
- Views: 3306
Re: Vapor trail tech
Cheers storkfoot im gona finish setting it up tonight and the scoot is running sweet so I will take a ride out and see what its showing! I suppose if its fine over the next week and stays at a constant temp or around that temp anyway then i will use that as a guide. I will use your info to keep an e...