Search found 169 matches

by hungdog
Wed May 30, 2018 5:22 pm
Forum: Tech FAQ
Topic: Reed valve crank clearance
Replies: 2
Views: 2424

Re: Reed valve crank clearance

anyone ?
by hungdog
Tue May 29, 2018 5:17 pm
Forum: Tech FAQ
Topic: Reed valve crank clearance
Replies: 2
Views: 2424

Reed valve crank clearance

Does it matter what the clearance is on reed cranks against the housing outside edge of crank ? ie thin edges.
If i had the housing enlarged to 100mm diameter and then used a standard reed crank would it work ?
by hungdog
Sat Mar 17, 2018 12:27 pm
Forum: Vespa Tech
Topic: Pinasco 62mm crank
Replies: 0
Views: 1756

Pinasco 62mm crank

Pinasco 62mm crank :ugeek: anybody know what size the big end pin is and is it straight (not concentric). Wonder if you could put a DRT 2mm concentric pin in to take it out to 64mm stroke.
by hungdog
Tue Mar 13, 2018 1:03 pm
Forum: Liquid Cooled, Motorcycle Engine & Automatics Section
Topic: lambretta 290 rotax
Replies: 198
Views: 143345

Re: lambretta 290 rotax

Quick question what was the piston crown height of the 580 piston you used ? 31mm

Ta
by hungdog
Tue Mar 06, 2018 6:12 pm
Forum: Vespa Tech
Topic: Kingwelle 64mm crank
Replies: 4
Views: 3307

Re: Kingwelle 64mm crank

:ugeek: Kingwelle's reply

The motor has to be spindled up to 100.00mm , the crank diameter is 99.3mm
by hungdog
Tue Feb 13, 2018 8:57 pm
Forum: Liquid Cooled, Motorcycle Engine & Automatics Section
Topic: New pinasco casings
Replies: 3
Views: 5205

Re: New pinasco casings

I'm gonna be using a slave casing which will be heavily welded and machined to take cylinder, wondered if there was a difference in strength in the rest of casing between p2 and T5 ?
by hungdog
Mon Feb 12, 2018 2:00 pm
Forum: Liquid Cooled, Motorcycle Engine & Automatics Section
Topic: New pinasco casings
Replies: 3
Views: 5205

New pinasco casings

Which New pinasco casing would you use ? If you were going to add a cylinder to , which required the studs repostioning and gasket face enlarging
:ugeek:
by hungdog
Tue Jan 23, 2018 7:53 pm
Forum: Vespa Tech
Topic: Kingwelle 64mm crank
Replies: 4
Views: 3307

Re: Kingwelle 64mm crank

Vespa Kingwelle 64mm crank for P2 more worried about web size and possibly having to machine cases to fit webs than worrying about the rod making contact.
by hungdog
Tue Jan 23, 2018 6:33 pm
Forum: Vespa Tech
Topic: Kingwelle 64mm crank
Replies: 4
Views: 3307

Kingwelle 64mm crank

Anyone know if any alterations are required to the casings when fitting a 64mm crank ?
by hungdog
Mon Oct 23, 2017 2:24 pm
Forum: Lambretta Tech
Topic: Air leak.
Replies: 6
Views: 3406

Re: Air leak.

Yep JB weld will do that , had it in my transfers on p2 casing for last 9 years still as go as new.