....another stunning scoot cut, chopped, raked, and painted by Sean Brady @ Scooterotica. Watch out for this one at Brid this weekend in the custom show.........
Scooter theme based on the Captain America chopper from the film Easy Rider.....
Captain America - Easy Rider....
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
- sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
1st prize for best chop at BRID ....
Sean Brady Scooters - 01765 690 698
-
- registered user
- Posts: 31
- Joined: Sat Jan 10, 2009 6:06 pm
- Contact:
Brilliant effort sean!!!!!
Have you got the dyno charts for it??
Have you got the dyno charts for it??
congratulations!!!!!!!!
-----Besa Boga Scooter Alliance-----
-----------Reggio Emilia----------
--------------Italy---------------
http://www.facebook.com/home.php?#/besa ... ef=profile
-----------Reggio Emilia----------
--------------Italy---------------
http://www.facebook.com/home.php?#/besa ... ef=profile
Well done!! Got a port map for it please?
Sponsors: Performance Tuning. Ve Uk. Scooter Center Koln. LTH . DRT
Got any dope hidden in the fuel tank?
- sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
MUTTONJEFF/TONY.....
funnily enough,Dyno results and port maps will be available soon..
I built and tuned the engine approx 3 years ago.
Its an indian cast iron 200,STAGE 5,ported casings ,original DJ pipe,30mm carb.
Its done a good few thou miles so far,but its coming in for a dyno and set up because Ian the owner has just fitted a retro style 30mm VHB delly (which was kindly rebuilt and converted by "KNOWLEDGE",as it was a four stroke one ).
Thats IF we can get it on the dyno.....as the scoot is something like 7 1/2 foot long..
funnily enough,Dyno results and port maps will be available soon..
I built and tuned the engine approx 3 years ago.
Its an indian cast iron 200,STAGE 5,ported casings ,original DJ pipe,30mm carb.
Its done a good few thou miles so far,but its coming in for a dyno and set up because Ian the owner has just fitted a retro style 30mm VHB delly (which was kindly rebuilt and converted by "KNOWLEDGE",as it was a four stroke one ).
Thats IF we can get it on the dyno.....as the scoot is something like 7 1/2 foot long..
Sean Brady Scooters - 01765 690 698
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
PMSL..muttonjeff wrote:Brilliant effort sean!!!!!
Have you got the dyno charts for it??
Ricspeed, gone but never forgotten RIP my friend #59