Hi peeps
Can someone tell me the size of the mag flange sealing plate bolts?
Thanks for any help.
Size
-
- registered user
- Posts: 379
- Joined: Thu Sep 03, 2009 7:53 pm
- Main scooter: Lambretta 1964 225 Special
- Contact:
I must have left mine off !
Do you mean the mag flange itself?
Do you mean the mag flange itself?
The sealing plate that the loom comes through mate
- HxPaul
- registered user
- Posts: 1110
- Joined: Fri Dec 06, 2013 1:58 pm
- Main scooter: lambretta Li 150
- Location: Halifax,Yorkshire
- Contact:
Is this what you mean http://www.ebay.co.uk/itm/Lambretta-Mag ... SwjqVZIvfx
Thank you Donnie
That's the one HxPaul.HxPaul wrote: ↑Sun Sep 10, 2017 9:21 am Is this what you mean http://www.ebay.co.uk/itm/Lambretta-Mag ... SwjqVZIvfx
just a point to consider, most of the supplied kits have flat or crosshead screws which you will never get a screwdriver on with the engine and tank fitted. I always buy separately m4 hex screws that enable my 1/4 inch socket to get on in situ. handy if you are having stator problems at side of road.