....currently under construction in the stable of Sean Brady Scooters.......
Waynes cutdown below....Wayne was the original owner of the Scooterotica Lambretta that started it all off: http://drunkmunkey6969.googlepages.com/ ... alambretta
Will this be Scooterotica 2 ?? The Bitch is Back?
Another customers on the go also.....
Side stand plumbed in:
And another:
Plenty on the go!!
A few scooters....
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Very good pics lovely lambrettas.
Many thanks to Wayne for his contribution.
Many thanks to Wayne for his contribution.
http://vespaclubvolos.com
http://www.lambretta-club.gr
Li 150 II - Li 150 III - TV 175 III - SX 200 - DL 150 - Lui 50 - Rally 200 - Vespa 50s
http://www.lambretta-club.gr
Li 150 II - Li 150 III - TV 175 III - SX 200 - DL 150 - Lui 50 - Rally 200 - Vespa 50s
is stevie wonder doin the weldin
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
- sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
yeah i know it all looks a bit rough...at this early stage but its done for strength not looks......
besides ,it will all look a lot better when ground off a bit and cleaned up.............and finished off.....
besides ,it will all look a lot better when ground off a bit and cleaned up.............and finished off.....
Sean Brady Scooters - 01765 690 698
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
Yes.....its holding the whole scooter together, one big speed bump and it might snap in half. Sean doesnt really do the tuning, we just send the cylinders off to the local blind school so Stevie can work his magic on the ports......he's got the exhaust port up to 100% of the bore with square edges...its very experimental, but we have high hopes.joespeed wrote:hope that welding is not structural,and that the tuning isn't on the same done with the same expertise!
regards
joe
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos