P Range Headset Wiring?

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
Lamaddict
registered user
Posts: 854
Joined: Wed Jan 07, 2009 8:35 pm
Contact:

I'm getting no power to the headlight and horn etc. Tnakfully, I''ve found another live on the ignition which was useful, so I've got one beam hooked up to that but which wire could I splice the new supply from to feed the other areas that need it?
ducksta
registered user
Posts: 1129
Joined: Sat Nov 20, 2010 10:16 pm
Contact:

Check you have the correct switches for the loom, and check at regulator end that it's all correct.
live life your a long time dead
mick1
registered user
Posts: 1292
Joined: Sun Dec 04, 2011 7:43 pm
Main scooter: Li Avanti 225
Location: York
Contact:

is it battery or none battery ? European spec' or USA ?
Lamaddict
registered user
Posts: 854
Joined: Wed Jan 07, 2009 8:35 pm
Contact:

mick1 wrote:is it battery or none battery ? European spec' or USA ?
Battery model. US spec but it's not a sealed beam. If I could just know the main wire colour going to everything normally I could just splice it onto the supply I've found on the ignition.
railfancwb
registered user
Posts: 138
Joined: Tue Oct 27, 2015 3:51 am
Contact:

Here is a coded schematic I found. Hope it helps.

Image



Sent from my iPhone using Tapatalk
ducksta
registered user
Posts: 1129
Joined: Sat Nov 20, 2010 10:16 pm
Contact:

behind the horncasting the grey on the right hand side that loops 2 connections is the main power feed ive spliced this before for live feed
live life your a long time dead
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 11 guests