I think it would also be useful for me to recheck my timing whilst I'm at itScooterdude wrote:Ok those silver speckles would indicate a degree of pre-ignition which would suggest you really need to retard your ignition timing, but as your on a varitronic I really don't know how you would do that.
Try a BR9ES and see how it looks, although I don't think they have a great reputation for longevity, I guess you could try a Champion equivalent to the 9.
Plug chop colours
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
Cheers Ryskie - I'll try a 9 tomorrowRyskie wrote:First three look okay but If it were mine I'd aim for a bit darker. As above try an NGK 9 or a Denso W27ESU
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ
- GTFOMWSC
- registered user
- Posts: 290
- Joined: Sat Jan 01, 2011 5:49 pm
- Main scooter: GP230 Super Monza CS Tuned
- Location: Rugby
- Contact:
Just rebuilt mine and rejetted etc my plug chops are darker than those running on a b9.It ran absolute crap on an 8 and 7 but really well on a 9, done 600 plus trouble free miles so happy using the 9 starts first kick as well.Mine has been dynoed and plug colour was correct once it was done.I'd suggest before you start messing about adjusting this and that dyno it and let whoever is doing the dyno do the adjusting tbh.
the man don't give a f@@k
-
- registered user
- Posts: 450
- Joined: Thu Oct 25, 2012 2:49 am
- Main scooter: GP-1971-Ts230/S2-1960-Ts230
- Contact:
alanscottj wrote:Needle raised one clip, darker but not nice to ride, splutters like
Sent from my iPhone using Tapatalk
put your clip back into its original position m8 & put a tiny washer under the needle clip ok....
this will give it a half position between what you`ve had it
then seen how its runs, & check your plug
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
Great idea - something I have done before but I can't find a washer small enough!!!Norrie Bodge wrote:alanscottj wrote:Needle raised one clip, darker but not nice to ride, splutters like
Sent from my iPhone using Tapatalk
put your clip back into its original position m8 & put a tiny washer under the needle clip ok....
this will give it a half position between what you`ve had it
then seen how its runs, & check your plug
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ
- Toddy
- registered user
- Posts: 6005
- Joined: Sun Mar 08, 2009 12:01 am
- Main scooter: Lambretta Series 1
- Location: East Yorkshire
- Contact:
Great idea - something I have done before but I can't find a washer small enough!!! [/quote]
You can buy them here
https://www.dellorto.co.uk/shop/dellort ... le-washer/
You can buy them here
https://www.dellorto.co.uk/shop/dellort ... le-washer/
As my Dad used to say "Each to their own lad"
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
Toddy wrote:Great idea - something I have done before but I can't find a washer small enough!!!
You can buy them here
https://www.dellorto.co.uk/shop/dellort ... le-washer/[/quote]
Thanks Toddy but I'm not sure I can bear to pay Β£4.26 for one tiny washer!
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ
-
- registered user
- Posts: 1154
- Joined: Thu Jan 08, 2009 12:08 am
- Main scooter: '70 GP150 [TS1 225]
- Location: Merseyside
- Contact:
I have loads of small washers. They are a bit too big for the recess in a PHBH slide but 5 minutes with a small file will sort it.
If you PM me your address, I'll pop a few in the post.
If you PM me your address, I'll pop a few in the post.
-
- registered user
- Posts: 450
- Joined: Thu Oct 25, 2012 2:49 am
- Main scooter: GP-1971-Ts230/S2-1960-Ts230
- Contact:
Got some brass washers that I use I can send you a couple if PM your address
-
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
Been away for a week mate and returned to find an envelope with two washers had arrived! Top man indeed - if you happen to be at Llandudno Rally this year there'll be a pint in for youNorrie Bodge wrote:Got some brass washers that I use I can send you a couple if PM your address
Many thanks.
Scott
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox ππ