Does anyone know a source? I see several dealers are selling but does anyone know if any specific ones (i.e. Scootopia, Casa, MB) are high tensile, as per original?
Thanks!
High tensile M7 end plate nuts & spring washers?
- vegansydney
- registered user
- Posts: 223
- Joined: Wed Jan 28, 2009 8:52 am
- Location: New York City
- Contact:
-
- registered user
- Posts: 261
- Joined: Sun Sep 18, 2016 11:19 am
- Location: Great Yarmouth
- Contact:
+1 for mb end plate bolt kit. They will be all correct length and height for heads.
- vegansydney
- registered user
- Posts: 223
- Joined: Wed Jan 28, 2009 8:52 am
- Location: New York City
- Contact:
Thanks for the recommendation. Regardless of what Innocenti did in the '70s, I'm not a fan of bolts into alloy cases. Studs every time. I have studs, just looking for some high tensile M7 spring washers and 'thin' nuts.mr mugello wrote:+1 for mb end plate bolt kit. They will be all correct length and height for heads.
-
- registered user
- Posts: 1693
- Joined: Tue Jan 31, 2012 8:54 pm
- Main scooter: Lambretta GP
- Contact:
Scooter Restorations were selling the original spec' items, which meant that they were my 'go to place' but the last ones that I ordered arrived as correct studs but crappy/common soft nuts
It might be worth trying Scooter Restorations to see if they still have some of the correct spec' ones on the shelf.
Adam
It might be worth trying Scooter Restorations to see if they still have some of the correct spec' ones on the shelf.
Adam
- vegansydney
- registered user
- Posts: 223
- Joined: Wed Jan 28, 2009 8:52 am
- Location: New York City
- Contact:
Thanks Adam.Adam_Winstone wrote:It might be worth trying Scooter Restorations to see if they still have some of the correct spec' ones on the shelf.
In the meantime, found these trawling MB's website. Waiting on delivery, but if they are as described
then they will be exactly what I'm looking for. Fingers crossed.7mm high-tensile plain nut, thin,for use on gearbox endplate studs
-
- registered user
- Posts: 36
- Joined: Wed Jan 07, 2009 7:40 pm
- Location: Highbridge
- Contact:
I am not bound to please thee with my answers - William Shakespeare
- vegansydney
- registered user
- Posts: 223
- Joined: Wed Jan 28, 2009 8:52 am
- Location: New York City
- Contact:
^
Correct part, but no indication if the M7 nuts are high tensile, unless you know otherwise.
Correct part, but no indication if the M7 nuts are high tensile, unless you know otherwise.