lambretta 290 rotax

Anything related to Lambretta or Vespa Scooters fitted with LC, Motorcycle and/or Auto engines!
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

hi daz, simple way to think of is a one way valve, its self governing, in other words when the engine crankcase creates a vacumn the valve opens allowing fuel and air mixture in, when a positive crankcase pressure is created the valve closes so ingested mixture cannot escape,its then sent to the transfer ports and then combusted above the piston, allows inlet timing to be much longer duration than that of a normal piston port engine, a more modern inlet system introduced in motorcycles mainly during the 1970s/80s and is standard fitment on most modern 2 strokes these days, helps to reduce fuel spitback out of the carb as well.
dazblakey
registered user
Posts: 178
Joined: Sun Nov 13, 2016 7:24 pm
Contact:

Cheers Holty
Read all this thread tonight really interesting great explanations keep it up mate and the others guys

Sent from my D6603 using Tapatalk
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

ive done an all day session in the garage working on my case, heres a few pics, first is the crankcase opened up big engough for the crank webs, next shows the circlip to retain the drive side main bearing, and you can see the trench ive cut to give the big end some clearance, and then a view looking into the inlet, some more shaping here and there, but happy with the progress.

[imgImageIMG_0631_zpsyom10gfk by stephen holt, on Flickr][/img]


[imgImageIMG_0645_zpswwuejkwu by stephen holt, on Flickr][/img]

[imgImageIMG_0646_zpsopw0kskq by stephen holt, on Flickr][/img]
Last edited by holty on Fri Jul 21, 2017 10:05 pm, edited 2 times in total.
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

[imgImageIMG_0941 by stephen holt, on Flickr][/img]

a pic showing the drive side oilseal fitted
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

before the oilseal was fitted, bearing fitted and circlip

[imgImageIMG_0932 by stephen holt, on Flickr][/img]
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

[imgImageIMG_0942 by stephen holt, on Flickr][/img]

first fitting of the crankshaft

[imgImageIMG_0943 by stephen holt, on Flickr][/img]

and then magflange and packers in place
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

[imgImageIMG_0944 by stephen holt, on Flickr][/img]

piston fitted to rod, just to check clearance at bdc, i neednt have worried there was plenty of clearance.
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

ImageIMG_0945 by stephen holt, on Flickr
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

i had o do some repairs to the endplate studs, so i added 2 extra ones while i was at it in an effort to make it stronger
ImageIMG_0933 by stephen holt, on Flickr
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

hi holty that circlip on the bearing looks great and that reed valve opening looks massive what reed are you useing
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 8 guests

cron