Scooterotica

JINX

You can make your own that uses the mirror mount holes under the headset of most pre P headsets. http://tinyurl.com/38u7bxz http://gallery.me.com/portergieske#100364/IMG_2199&bgcolor=black http://www.flickr.com/photos/25484454@N03/5054368637/ Here is the highly detailed cad drawing version. http...

JINX

I did the modifications as described on the german site. My setup is different, so your results may vary, but I think that it matters with the mods. I have a normal stroke length mazz crank that has been cut at the web to increase induction timing. I have a lathed cylinder head, squish is 1.2mm, as ...

JINX

The trick I learned when bleeding my anti dive version was to gently smack the master cylinder and or the brake lever with a rubber mallet. Each time I did this, a bubble came up from the plunger area, I continued to actuate the handle slightly, then smack, then pull again. Eventually, I removed all...

JINX

I too would be very interested to obtain a copy of these set of drawings.

JINX

Here's a little tid bit to add to this discussion. I ran a battery-less AC system with LED brake lights. Power went through the usual ducati regulator and out to the loom. I used the stock running light for the rear and added 2 acorn led's, each having 12 or so diodes in them. Because they are used ...

Search found 45 matches

Re: New ScootRS Vespa disc brake conversion

Re: PX200 + longstroke + malossi set up info needed

Re: SsootRS Superfly Disc..Drum Type.

Re: Innocenti frame drawings anyone?

Re: running pathfinders without battery

Login • Register

Advertising