Search found 1197 matches

by gaz_powell
Thu Oct 26, 2023 10:08 pm
Forum: Lambretta Tech
Topic: Choke cable
Replies: 2
Views: 3556

Re: Choke cable

Martin Leech makes chokes correct size fit phbh.

Perfect fit.

For left or right hand carb in black or grey

I found the Chisel adjustable to bulky
by gaz_powell
Thu Oct 26, 2023 10:05 pm
Forum: Vespa Tech
Topic: T5 Flywheel Bearing Catching on Crank
Replies: 3
Views: 6232

Re: T5 Flywheel Bearing Catching on Crank

The T5 flywheel side bearing does sit proud by about a mil.

This is why so many T5 casings have had the bearing go through the casing at assembly.

Sound like crank out of true, also check the drive bearing
by gaz_powell
Thu Jul 07, 2022 8:17 pm
Forum: Vespa Tech
Topic: Weekend work
Replies: 2
Views: 5824

Re: Weekend work

Sorry for late response, yep new switch and a bit if new wiring. All working perfect
by gaz_powell
Thu Jun 02, 2022 1:21 pm
Forum: Lambretta Tech
Topic: Cork chain case gasket
Replies: 2
Views: 7022

Re: Cork chain case gasket

I've got them from here, no problems

https://www.ebay.co.uk/itm/203245234811
by gaz_powell
Sun May 29, 2022 7:36 pm
Forum: Vespa Tech
Topic: Spaco
Replies: 3
Views: 5768

Re: Spaco

Glad you sorted... If you want a true rally look with spaco, BGM now make an air screw that is the same as the old dellys
by gaz_powell
Sun May 29, 2022 8:58 am
Forum: Vespa Tech
Topic: Spaco
Replies: 3
Views: 5768

Re: Spaco

SI or PHBH type. All SI carbs sre made by Spaco now, regardless if the are labelled Pinasco, BGM etc. Ive use the 24E, 26E and 24G, with no problems at all on tuned and untuned P2 and T5. Carb settings are the same, jets interchangeable with dellorto. One thing i do is cut the air screw down and slo...
by gaz_powell
Fri Apr 22, 2022 8:28 pm
Forum: Lambretta Tech
Topic: Hard to start
Replies: 33
Views: 26768

Re: Hard to start

I had this and it turned out to be stator, it had what appeared a good spark outside the bike, all readings were good. Put a clean plug in and it would sometimes fire, once running revving clean on the stand... Turn it off and wouldnt start. I pulled a stator from a runner and bingo. Put new pick up...
by gaz_powell
Sat Mar 05, 2022 10:17 am
Forum: Lambretta Tech
Topic: TV175 2nd series light switch housing
Replies: 5
Views: 9471

Re: TV175 2nd series light switch housing

Most likely the latter, bad remanufactured part.