Scooterotica

Nik221

What flywheel and ignition are you using ?

Nik221

I would be happy if i didnt to be honest but what dhould i do then... stay on rotary valve ? Open the engine to port the intake on the rotary pad ? Timings etc ? I would rather not go reed. Thanks for the reply.

Nik221

I have ordered a Malossi x360 reed valve kit and a serie pro flowed by worb5 60mm crank. Thanks for the help

Nik221

What about using a malossi reed valve kit with this carb for touring ?

Nik221

Im thinking to go reed valve ? Which would you get at a not too rocket high price ?

Nik221

Its a phbh 26 BS. Im sure its a mixture screw. Im currently riding it without a filter just to try and it goes much smoother and crispier and more response on the throttle, there is play in the cable. And no air leaks for sure becuase i had the original carb until a couple of weeks ago and was all ok.

Nik221

Hi everyone need a bit of help on jetting my px malossi engine my setup is a malossi 210 sport 2013 with ported piston, also cut crank 57mm stroke, mmw head, JL RH exhaust and i have installed a kytronik. the jetting for now is a 55 idle, 126 main, X13 needle 2nd notch from the top, 40 slide, choke ...

Nik221

Hi everyone need a bit of help on jetting my px malossi engine my setup is a malossi 210 sport 2013 with ported piston, also cut crank 57mm stroke, mmw head, JL RH exhaust and i have installed a kytronik. the jetting for now is a 55 idle, 126 main, X13 needle 2nd notch from the top, 40 slide, choke ...

Nik221

No, but would love to

Nik221

What else to do then ?

Search found 56 matches

Re: GT240 Build

Re: Vespa px malossi 210 jetting

Re: Vespa px malossi 210 jetting

Re: Vespa px malossi 210 jetting

Re: Vespa px malossi 210 jetting

Re: Vespa px malossi 210 jetting

Vespa px malossi 210 jetting

Vespa malossi 210 phbh 26 carb jetting

Re: Vespa Px 5 speed

Re: Vespa malossi holed piston

Login • Register

Advertising